Furniture installer, what experience is required.

Furniture refers to a type of utensils that are indispensable for human beings to maintain normal life, engage in production practices and carry out social activities. Furniture in the narrow sense refers to a kind of utensils and equipment for people to sit, lie or support and store items in life, work or social practice, furniture is not only a simple functional material product, but also a widely popular popular art, which is to meet some specific uses, but also to meet the spiritual needs of people to watch, so that people can produce a certain aesthetic pleasure and trigger rich associations in the process of contact and use.

1. Read the installation drawings carefully before installation, and prepare common tools, such as flat cross-mouth screwdrivers, hammers, etc. If there are more similar parts, the drawings will draw a comparison of the real size, and the parts that are not used are crossed, and it is very easy to distinguish various parts.

2. If there is damage to the existing plate during the inspection, you can contact the merchant to repair the parts. Where screws, eccentric parts, and axes are to be installed, the guide holes will be opened, and there is no need to worry about the positioning of the parts. It should be noted that it is not necessary to put the wrong parts on and then screw them repeatedly, otherwise it is easy to damage the plate, and there will often be instability and tilting after installation.

3. For the cabinet furniture of combination cabinets, TV cabinets and decorative cabinets, they are generally installed from the bottom, and when the hardware is installed, it is necessary to check whether there is a CD rack and a small door must be installed first, pay attention to whether the drawer has a size and beveled edge, so as to avoid confusion during installation, and must not miss the installation of plugs, magnetic bumps and glue, etc., which will affect the quality of products.

4. For the suite containing wardrobe, large bed, dresser and stool, and bedside table, the installation should be from large to small, first wardrobe, dressing table stool or computer desk, bedside table, and finally large bed. The wardrobe is generally cut up face down, if the front of the top and bottom plate is too large (v is a large curve in front of the necklace and bottom plate), it should be assembled back down.

5. For solid wood sofas, leather sofas, fabric sofas and rattan sofas, rattan and fabric sofas need to be installed very little, and generally only need to install sofa legs The combined solid wood sofa is generally connected to the backrest board from the side armrest, and then the front horizontal bar is installed, followed by another armrest, then the sitting board and finally the sofa leg. When installing the screws, do not screw to the end at one time, when entering 2 3, put the whole frame flat on the ground and step on the flat iron frame hard, and then tighten the screws, so as to avoid the phenomenon of uneven sofa after installation.

First of all, you need furniture installation experience, if you have work experience in a furniture factory, or carpenter experience, etc., you can do it;

In addition, it is best to make yourself look clean and tidy, polite, and well-behaved, and you will be better and more likely to achieve results than others.

Familiarity with the use of tools and the structure of furniture is sufficient.