-
Anonymous users2024-01-23The size of the space determines the means of differentiation.
If the bathroom space is large, with an area of about 10 square meters, when designing dry and wet partitions, you can design the wardrobe and powder room into the bathroom, which is the storage area for clothes and makeup, and the other side is the washing and bathing area; If the space is about 5 square meters, you can use glass or other materials to separate the toilet from the bathtub, which is convenient for use and a separate space for bathing.
Clever use of ground treatment.
There are several ways to partition wet and dry. The easiest way is to install a shower room to separate the bath, which can effectively avoid splashing and water vapor diffusion.
The shower room is usually set up in the corner of the bathroom to keep the outside area dry. There are various varieties of shower rooms, and the plane shapes are square, rectangular, fan-shaped, diamond-shaped, etc.
Today's bath bombs are basically air-warmed, and they are almost the same wherever they are installed.
The innermost part is made into a shower area, the ideal width of the shower area is 90, and the outer one is the toilet.
In the "Technical Regulations for Indoor Waterproofing Engineering in Buildings" CECS 196-2006, "the walls of toilets and kitchens should be flooded with cast-in-place concrete that is more than 150mm above the floor of the building".
It can be used, but the ground is best to be non-slip, you can refer to the bathroom decoration renderings of the decoration gallery network.
1. You can put 70 cm wide, from the ground to the top of the empty wooden frame partition; You can also paint the screen with lacquer, and a glass partition with a push and pull is more suitable. >>>More