The Gefeng integrated ceiling bath bomb at home has been installed, how should it be accepted?

Try whether the various functions are available, the wind, and the exhaust fan has abnormal sounds, if not, you can pay, Gefeng is a very good brand, good but not expensive, light luxury style.

Acceptance Criteria:

1. The variety, specification, color and base structure and fixing method of the materials used in the ceiling project should meet the design requirements.

2. All kinds of keel ceilings must be fixed firmly, and after fixing, a comprehensive inspection and leveling should be carried out, and the installation position should be checked correctly.

3. The specifications of the wood used in the wooden skeleton should be according to the design requirements, and the wood should be glued and fixed with nails, and the side in contact with the cover panel must be planed.

4. The wooden skeleton structure of the roof should meet the fire protection requirements.

5. All kinds of cover panels should not have bubbles, peeling, cracks, missing corners, dirt and pattern defects and other defects, the surface should be smooth, the edges should be neat, and the color should be consistent.

6. The hole spacing of the perforated board should be arranged neatly, and the glued laminate and wooden fiberboard should not be degummed, discolored and decayed.

7. If plywood and medium-density fiberboard are fixed with nails, the nail distance is 80-120mm, the nail length is 25-35mm, the nail cap should be flattened and entered into the board, and the nail hole should be smoothed with oily putty.

8. When the plywood surface is painted with varnish, the wood grain and color of the adjacent board surface should be similar.

9. When pasting or brushing paint on the cover panel, the seams should be brushed with white latex and pasted with muslin, and the seams should be lapped at least 5cm on both sides

How to accept. ：

1. The visual level of angular installation is horizontal.

First of all, we need to check whether the visual level of the angle installation is good, and the 90-degree angle is seamless and there is no obvious distortion. Then observe the overall flatness of the gusset and whether the gaps between the gusset are visually good.

2. The strength of the screw rod.

The next thing to check is the strength of the screw. We can remove a few gussets, check whether the distance between the screws meets the installation standards, and then pull the screws a few times with the appropriate tension by hand to confirm whether there is looseness.

3. The number of electrical installations is firm.

Then check the number of electrical installations firmly. We can try to push the electrical body with normal force with our hands to see if the electrical appliances will fall off the triangular keel.

4. Electrical function.

The last thing that needs to be tested is whether the electrical function is working properly. We can turn on the switch to see if the appliance is working properly; whether the location of the ventilation and heating modules is reasonable; When the ventilation or air heating module is turned on, whether the sound is normal, and there should be no obvious noise.