The toilet drain is 2 cm above the ground and will not affect the installation of the flange ring

Updated on Toilet 2024-02-13
1 answers
  1. Anonymous users2024-01-23

    It's not a big problem, if it's not easy to install, you can see off the tall one.

Related questions
The main drain is below the floor tiles how to install the toilet
6 answers2024-02-13

1. Preparation before the installation of the toilet.

1. Before installation, a comprehensive inspection of the sewage pipeline should be carried out to see whether there is mud, sand, waste paper and other debris in the pipeline, and at the same time check whether the ground of the toilet installation position is horizontal. Cut the drain short, and if possible, make the drain 2mm-5mm above the ground. >>>More

How to deal with the leakage at the connection between the drain pipe and the toilet drain in the up
1 answers2024-02-13

Upstairs landlord responsibility.

If the water leaks at the joint between the toilet sewer pipe and the floor slab, is it that the water is used upstairs again, causing the water to seep downward; If this is the case, it is because the waterproofing is not done well during the upstairs decoration, which will cause the water to leak downward; >>>More

Toilet toilet drain drain bend from the ground size standard
1 answers2024-02-13

Hygiene: What is the distance of the toilet drain trap?

How high should the expansion joint of the toilet drain pipe be installed from the ground
2 answers2024-02-13

The first to fifth floors of the toilet drain pipe are equipped with expansion joints, but the sixth floor (top floor) has become an exhaust pipe, whether to install expansion joints?

Is it better to use 45 degrees or 90 degrees for the elbow of the flush toilet drain pipe, and how t
1 answers2024-02-13

45 degree elbow.

90 degrees is not convenient for discharging dirt and is easy to block. >>>More