The toilet lighting button is broken, buy a new switch, the wire is not long enough, and the switch

Updated on Toilets 2024-02-10
5 answers
  1. Anonymous users2024-01-23

    There is no impact on the use, but the line is still unsafe after pulling the switch when changing the bulb.

  2. Anonymous users2024-01-22

    Test it with a tester, it may not be safe.

    The switch must control the live wire!!

  3. Anonymous users2024-01-21

    If there is no effect, the single-open switch has no effect.

  4. Anonymous users2024-01-20

    If there are only two wires connected to the switch, there is no effect.

  5. Anonymous users2024-01-19

    How far can the control distance be with the RF switch, and can it be controlled in other houses?

Related questions
Toilet light switch, control toilet lighting A one-open, five-hole single-hole socket (mirror front
3 answers2024-02-10

Hello: According to your description, it is difficult to answer here, if you know the basic knowledge of circuits, it is very easy to ask you to find a professional electrician to solve it for you, and it is dangerous to connect the wrong circuit yourself.

A switch under the kitchen sink was broken and was dripping all the time. What to do.
5 answers2024-02-10

Turn off the valve next to the water meter with the connection, then buy a new one and replace the broken one on the pipe, and close the valve next to the water meter to alleviate the current water leakage.

Can you buy another toilet seat if the toilet lid is broken at home?
2 answers2024-02-10

Reading guide] Some families buy toilet products that are not very good quality, and it doesn't take long to encounter the problem that the lid can't be closed well or the toilet lid comes out. At this time, most people who know how to run a family will find a way to deal with it themselves, because it doesn't seem to be so difficult to change the cover and still use it. It should be noted that different styles of toilet seats, their installation methods are also different, usually the bottom of the lid is connected to the toilet bowl where the back is stabilized with screws, just use a wrench to reach down the screws on both sides, unscrew them to replace the entire toilet seat. >>>More

If you buy a new solid wood bed for a month, the backrest position is cracked, does the manufacturer
1 answers2024-02-10

If this kind of collision is not generated, the manufacturer must be responsible for the product quality problem.

The LED light in the toilet is broken, and I want to prepare to replace it with a bull LED light, wh
3 answers2024-02-10

If the LED light is on, it is not bad, it is the power supply part of the lamp that is faulty, it should be the power supply regulator fault, and the LED lamp power supply voltage regulator ballast integrated plug-in is replaced.