-
Anonymous users2024-01-23Use an ink fountain to pop out the top diagonal line, determine the center point, and draw a circle along the center point, which is usually done by carpenters!!
-
Anonymous users2024-01-22?Most of the ceilings are in the living room or dining room, what shape of the ceiling is designed or according to your decoration style, so how to do the round ceiling, what are the steps to make a circular ceiling? 1. Material preparation:
Prepare the necessary construction materials. According to the design drawings, determine the elevation, bounce the horizontal line, and prepare to start installing the keel. ?
2. Install stable brackets and keel frames: keels are the key to the stability of the ceiling. It is recommended to use a gypsum board ceiling keel of about 30*50mm to ensure the stability of the keel support.
Horizontal lines are projected at the edge of the wall; Cut the strips of wood to the desired length; Wooden strips with hammers and steel nails are fastened to the wall along the horizontal line; Then use a pneumatic code nail gun to fix it again. To install the wooden keel on the top surface, it is necessary to pay attention to the stability, so the expansion screws are used to fix the wooden strips. ?
3. Wooden ceiling combination installation: The circular ceiling frame is made of a combination of wooden keel and plywood. The plasticity of plywood can be used to make a circular shape.
Before the plate is installed, it must be glued and fixed to provide the stability of the ceiling. Generally speaking, the circular shape of the design drawings is made on the ground first, and then installed and fixed to the top surface. The curved corners of the ceiling can be sewn with 3mm plywood.
??4. Ceiling sealing board: After installing the wooden ceiling frame, install gypsum board on the surface of the wooden frame.
1Create a circle, add a spline modifier, and extrude the outline. >>>More
Circular ceiling you can first release the keel and round sample on the ground, and then, with the nine-centimeter board according to the model carved out of two circles, moreover, according to the thickness of the design requirements with a wooden square along the nine-centimeter board circle made into a three-dimensional body, the circular thickness can be wrapped with plywood or gypsum board, and can be hoisted after completion.
First, the fillet is cut, and the picture above is the remaining material, and the useful part is already on top. >>>More
Use a wooden keel to nail the frame directly, and then seal the surface once with gypsum board, and then do the modeling below. Just scrape putty oil latex paint on the back. It means to make two or more layers of ceilings, one of which is to seal the entire ceiling.