-
Anonymous users2024-01-23According to your description, the drain valve cover is not put down, if it will not be disassembled, you try to press the drain valve a few times in a row, so that he should be no problem to fall, the white lever is the top rod of the water inlet sealing valve, the water inlet water volume will float the buoy, and the water inlet valve will stop the water inlet when the sealing environment is generated.
-
Anonymous users2024-01-22Possible causes: no water source, inlet pipe blocked (e.g. valve closed), pump leakage, no water in the pump (fill up with water and turn it on).
-
Anonymous users2024-01-21Click the water button twice, and it will be fine, but the piston inside may be stuck and leaking.
1. What is the reason why the toilet bowl does not stop being watered? >>>More
It should be the rubber mat that the toilet is clogged with, and carefully observe whether there is a slight leakage.
Method 1. Generally speaking, a better toilet bowl has a filter inside, and after using it for too long, the filter will be blocked by too much scale, which will lead to the situation that tap water cannot come in. At this time, everyone only needs to take off the filter and clean it. >>>More
It should be caused by a leak in the toilet tank, just fix it. >>>More
You're an older tank fitting. Mainly 4 parts, that is, the water plug is aging or there is scale caused by the loose sealing, the water seeps into the potty, the water level in the tank drops, the float (2) falls, and the water enters (3) to replenish, and it will make a sound. You can see if the water blockage can be cleaned up, or you can only replace it with a new one.