How to remedy the toilet hole hitting the water pipe

Updated on Toilets 2024-02-12
3 answers
  1. Anonymous users2024-01-23

    Now everyone is using PPR water pipes, if it is broken by an electric drill, the only way is to open the wall tiles at least 40 to 50 cm, and then use 4 elbows to re-weld, if you are reluctant to hit the tiles, the inside of the wall pipe will be scrapped, and the outside will be re-made open pipe.

  2. Anonymous users2024-01-22

    It is difficult to remedy, only to change the water pipe.

  3. Anonymous users2024-01-21

    There is no good way, only chisel it out and change it.

Related questions
1 answers2024-02-12

1. Toilet renovation.

Knock out the upper part of the wall of the bathroom against the master bedroom and the second bedroom, and replace it with glass bricks, and the position is more than 2 meters and 30 cm, so that the lighting has a modern style. >>>More

2 answers2024-02-12

It is recommended that there is only one way, replace the door of the bathroom, use the door of aluminum-magnesium alloy, choose to use stained glass in the middle, a large flower blooms richly, and can be used as an entrance, and can improve the feng shui of the home.

5 answers2024-02-12

In this case, you can't be soft-hearted, look for them every day, you are soft-hearted and they will drag, the attitude must be resolute, I can tell you that it is a quality problem, is the leakage caused by the elbow of the buried pipeline, the wall is partially chiseled, repaired, it's good, it's troublesome now, it won't be troublesome in the future, find the property every day, let them be responsible, if it can't be solved, you can complain to the Consumer Association! It is also possible to expose the light to the media! Under the pressure of public opinion, I believe that the relevant departments should also pay attention to it! >>>More

5 answers2024-02-12

You find a pipe that is as thick and as long as this one, and the joints on both sides are screwed, and after the water is stopped, unscrew both ends and replace the new pipe. The tool requires two wrenches, which is very easy to do.

1 answers2024-02-12

It is not easy to change, and the cast iron pipe is not easy to handle. If the rust is not bad, you can cut it in the middle, connect it with UPVC pipes, and change the direction. The joints are treated with hoops.