-
Anonymous users2024-01-23Tile adhesive, also known as ceramic tile adhesive, model JCTA-300, is mainly used for pasting ceramic tiles, face tiles, floor tiles and other decorative materials, and is widely used in interior and exterior walls, floors, bathrooms, kitchens and other building finishing decoration places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.
Tile adhesive, also known as tile adhesive or binder, adhesive and other names, is a new type of material for modern decoration, replacing the traditional cement yellow sand, the adhesive force is several times that of cement mortar, can effectively paste large ceramic tiles and stones, and avoid the risk of falling bricks. Good flexibility to prevent hollowing in the production of drums. This product is a polymer modified cement-based tile adhesive, which is divided into No. 1 (ordinary type (reinforced) and No. 3 (heavy brick type) and other varieties.
No. 1 tile adhesive is suitable for pasting various floor tiles or small bricks on the wall surface of ordinary mortar surface; No. 2 tile adhesive has strong adhesion and anti-falling performance, and is suitable for the pasting of wall tiles, non-mortar surfaces such as wood plank surfaces or old finishes with large adhesion requirements;
No. 3 tile adhesive has large adhesion, more flexibility, can resist the stress caused by thermal expansion and contraction of the adhesive layer, and is suitable for pasting tiles on gypsum board, fiberboard, plywood or old finishes (tiles, mosaics, terrazzo), etc., as well as pasting various stone slabs of larger sizes. In addition to gray, tile adhesives are also available with a white appearance, suitable for light or translucent marble, ceramic tiles and other natural stones.
-
Anonymous users2024-01-22The smell of home decoration is generally glue and the smell of MDF and particleboard, glue and MDF account for the vast majority It is best to recommend that you directly consult by phone or go to see it on the spot.
-
Anonymous users2024-01-21It is the smell of glue, organic waste gas, and how much the smell is.
This tile adhesive is really magical, I use a liquid tile adhesive called Yucan tile adhesive at home, the bonding strength is really incomparable, and then there is no problem with drilling holes on the tile, the general normal construction is to do brushing on the waterproof tile, if you want to stick firmly, you can apply a layer of adhesive on the waterproof without brushing. Hopefully this answer is satisfactory.
The use of traditional cement tiles, whether large bricks or small bricks, will have the risk of falling bricks, and now most of the decoration is polished tiles, vitrified tiles and other tiles with high adhesion requirements, which is why we have been emphasizing the use of tile adhesive tiles. >>>More
As we all know, cement mortar is generally used for tiling, but in recent years, there have been more tile adhesives on the market, and I don't know which one is better to use! >>>More
You can wipe it with an organic solvent such as gasoline, remove it, and be careful not to use too much force when wiping.
The viscosity of the tile adhesive is not enough, it will fall if it is too heavy, and it is still okay to use it in parallel, but it is really not very easy to climb the wall However, it also depends on what bricks are glued to tile adhesives, all ceramic tiles are easy to use tile glue, half porcelain and half pottery or pottery tiles are quite difficult to use, as long as you don't buy fake tile glue, the general all-porcelain type is no problem, if you are afraid that there is a problem, you can paint the adhesive once after the tile. >>>More