What to use to make partitions in bathrooms and kitchens to prevent moisture

First, the choice of substrate.

The area of the bathroom is usually not large, and it is really difficult to separate the dry and wet in an area of a few square meters, so we have to hope for the basic materials with moisture-proof engineering. Therefore, it is recommended that the bathroom cabinet selected should have better moisture-proof performance in terms of material and technology. If a good quality product is fully ventilated, there is no problem if the humidity reaches 95% in a short period of time, because it will dry out in a short time.

Second, panel selection.

The first barrier between bathroom furniture and the humid air in the room is the furniture panel, so the advantages and disadvantages of the panel are also a problem that we need to consider. In the face of the dazzling array of leaky oak panels on the market, the owners must not have any choice when purchasing, and the panel must be selected to suit themselves. High-quality solid wood veneer and wood grain with plastic resin protection are easier to maintain and have a classic aesthetic in terms of decorative effect.

3. Internal moisture-proof.

A common phenomenon in the bathroom is that the low floor of the sink cabinet will be deformed after a period of use, because the water pipes hidden in the cabinet are not taken seriously. Because the water pipe is relatively hidden, it was installed without considering the stability, so the low waterside of the cabinet remained and soaked the furniture, resulting in an irretrievable situation over time. Therefore, it is necessary to use a waterproof aluminum bottom plate with a waterproof bumper strip, and this will not be the case.

Fourth, pay attention to the installation process.

Be sure to pay attention to the sanitary ware in the bathroom. While choosing bathroom furniture is important, it is only the first step, and the installation process is equally important, and if you don't do it well, it will be useless. You must know that water droplets and water vapor are pervasive, and it is best to do a good job of waterproof and moisture-proof, and you must do a good job in the installation of bathroom furniture.

According to the use of sanitary partitions, it is quite extensive, sanitary partitions are made of specific plates, with special accessories through production, on-site installation 32313133353236313431303231363533e59b9ee7ad9431333363393739

Visual Color Decoration Group will introduce you to several common materials about sanitary partitions. If you don't understand anything, you can also consult the designers of visual color decoration.

1. Man-made plate partition: This partition board material is mainly made of phenolic resin, which is a moisture-proof, collision-resistant, foul-resistant, and easy-to-clean partition board material. This kind of man-made panel partition has a high cost, but it is durable, and is suitable for harsh environments such as moisture, dryness, high temperature, and fire prevention.

2. Natural stone partition: This partition material is mainly made of natural stone, which is a partition board material with a solid structure and easy to stain, alkali and yellow. It is integrally formed, no need to close the edges, and the door leaf needs to be matched with other materials, with good appearance and texture, and slightly worse integrity; The cost is high, the durability is long, the maintenance is not easy, and it is often used in the environment with high requirements for humidity and fire rating.

3. Composite panel partition: This partition plate is light in texture, easy to be affected by the environment, there are joints, and the joints are easy to be eroded by water vapor and expand and corrode, and the edge is treated with aluminum or stainless steel edge strips, which are easy to deform and oxidize. The cost is low, the durability is poor, the maintenance and elimination are fast, and it is suitable for relatively dry, normal temperature and non-fireproof environment.

4. Plastic partition: This partition is made of plastic, which is a waterproof, but not resistant to high temperature, scratch, easy to deform and pollute the material, using plastic or aluminum to close the edge with seams, and the seams are easy to be eroded by water vapor, no sense of wholeness, and the color selection is also less. This kind of separator has low cost, low maintenance cost, very fast obsolescence, and is suitable for relatively dry, normal temperature and non-fire environment.

Moisture-proof board partition, bai is to add a certain amount of moisture-proof particles in the production process of the substrate, also known as polydao

Cyanamide board is specialized, using multi-layer special fiber material.

The material, soaked with an appropriate amount of phenolic resin, made by high temperature and high pressure, greatly reduces the degree of expansion of the section of the moisture-proof board when exposed to water, suitable for use in humid environments, and is a good choice for bathroom partition materials.

Tempered glass partition, tempered glass belongs to safety glass. Tempered glass is a kind of prestressed glass, in order to improve the strength of glass, chemical or physical methods are usually used to form compressive stress on the surface of the glass, and the glass first offsets the surface stress when it bears external force, so as to improve the bearing capacity and enhance the wind pressure, cold and heat resistance, impact and so on of the glass itself.

Prefabricated partition panels, prefabricated partition panels are mostly made of gypsum and sand ash and other materials, which are spliced at the construction site after direct production by the factory, and have the characteristics of being strong and durable.