What to do if the siphon toilet is not flushed clean

Updated on Toilet 2024-02-26
5 answers
  1. Anonymous users2024-01-23

    You first use the washbasin to make a basin of water, and then use the water of the washbasin to flush the toilet, if it can be flushed, it means that the water volume of your toilet is too small, the amount of water in the toilet can be adjusted, find the place to buy the toilet and ask it, if it can't be flushed, one may be the pipe blocked, the other may be the quality of the toilet, remove the toilet, pour water directly into the sewer pipe with the basin, you can know whether the pipe is not smooth, if the pipe is okay then change the toilet.

  2. Anonymous users2024-01-22

    During the use of the siphon toilet, beware of sewage sediment blocking the air return hole. It is forbidden to pour cement, lime, paint and other dirt into the flush toilet, so as to avoid the dirt from precipitating and agglomerating in the flush toilet, and it is easy to block the return air hole over time, resulting in the water released from the flush toilet not forming a vortex, reducing the impact force to prevent the toilet from clogging.

    Beware of feces blocking the air return holes. Some people in the family often pull sheep feces, because the fecal particles are small, it is easy to block the air return hole. The flush toilet return hole should be checked frequently to see if it is blocked, and the blockage in the return air hole should be removed frequently to prevent the toilet from clogging.

    Pay attention to check that the air return hole is normal. When the toilet is unblocked and no foreign object is found, it should be considered to check whether the air return hole is normal. If a blockage is found, as long as the dirt and impurities in the air return hole are removed, the flush toilet will immediately return to normal.

    1. In fact, you can find a half-inch wide bamboo strip and stretch it into the toilet to dredge it to solve the problem, and you must be cautious in the process of solving the problem.

    2. Many times the toilet flushes more often, and it will pass by itself, especially if it is a soluble or breakable item such as soil and paper. If it's greasy, then rinse a basin of boiling water to melt it.

    3. Buy some caustic soda, boil water to melt the caustic soda, and pour it into the toilet. After ten minutes, everything will be cleared.

    4. They have the responsibility and obligation to help you when looking for a property.

    5. Buy a puff and dig it yourself.

    6. You can buy a loach and put it in the squatting toilet, pour it into the toilet with warm water, and the loach will desperately drill down when it is hot to achieve the purpose of making a toilet. If there's nothing hard about it, I think it'll work.

    7. The old-fashioned mop, fill the toilet with half of the water, and then use the mop to press the hole a few times, the action should be fast, and the pressure will get it through.

    8. Insert a relatively long flexible ventilation tube, ventilate inside, and then flush water.

    9. You go to the grocery store to buy a simple toilet toilet, pour water into the squatting toilet, and then use the toilet suction basin to pump a few times at the mouth of the squatting toilet, which is to use its air pressure to pass.

    10. Fill it with water and throw a few soap heads into it to soak to increase the lubrication function.

    11. Find a professional who dredges the pipes.

    Views.

  3. Anonymous users2024-01-21

    Toilet flushing is generally divided into the following situations:

    1. Slight blockage of the toilet: Generally, the toilet blockage is caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools. Toilet bowl.

    2. Toilet hard object blockage: accidentally fall into plastic brushes, bottle caps, soap, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

    3. Aging and blockage of the toilet: The toilet has been used for a long time, it is inevitable that it will scale on the inner wall, and in serious cases, it will block the vent of the toilet and cause the toilet to drain slowly.

    4. Toilet installation errors: generally divided into: the outlet at the bottom is not aligned with the drain outlet, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.

    5. Squatting pit to toilet: some old houses are installed when building a squatting pit, and the bottom of the sewer pipe is a U-shaped waterproof elbow, and when recreating the toilet, it is best to replace the bottom elbow with a direct bend, if it can't be replaced, then before installing the toilet, it is necessary to do a good job of cleaning up the bottom anti-water bend, and the installation is to avoid letting cement or tile fragments fall in. This kind of squatting toilet should be used with more care.

    3. Sewer blockage caused by decoration: This is the most likely occurrence of house decoration, we have met many cases of sewer blockage caused by carelessness during decoration, which is definitely not accidental, so we must take protective measures before decoration. This blockage is generally caused by cement blocks, tile fragments, sediment, paint, woven bags, etc.

    If it is a soft object such as a woven bag, you can use a dredge machine to dredge it directly, if it is blocked by a hard object such as cement slag, then you need a professional dredging tool to dredge it.

  4. Anonymous users2024-01-20

    If you can flush it clean, it means that the water volume of your toilet is too small, and the water volume of the toilet can be adjusted.

  5. Anonymous users2024-01-19

    Accidentally fall into hard objects such as plastic brushes, bottle caps, soaps, and combs when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

Related questions
5 answers2024-02-26

Due to the importance and frequency of use of the toilet, slow drainage is a very troublesome topic. In addition to the reasons for later use such as clogged pipes and insufficient water pressure. Choosing the wrong toilet is also an important factor. >>>More

7 answers2024-02-26

One is the blockage of soft substances (usually feces, paper towels, rags, etc.), and the other is the blockage of hard objects (toothbrushes, plastic bottle caps, small combs, small toys, pens, etc.). Of course, there may be other reasons for the blockage, such as problems with the pipes themselves. Here we are talking about two common reasons. >>>More

6 answers2024-02-26

What to do if the toilet can't be flushed at one time

The solution to the toilet sloppy. >>>More

1 answers2024-02-26

This is not easy to do, it is estimated that the water pressure in your home is not good, it is better to add a pressurized benzene.

1 answers2024-02-26

When the flush is weak, it will not whirlpool.

Check the bucket flush for foreign objects or insufficient water. >>>More