-
Anonymous users2024-01-23You're saying that the water stops halfway through. Then keep holding the switch until it's finished.
-
Anonymous users2024-01-22Open the lid of the water tank and adjust the adjusting screws of the automatic float switch.
-
Anonymous users2024-01-21It may be something that is broken, and you can find someone to fix it.
In this case, it is better to find a special maintenance personnel, otherwise the water bill will be a lot.
Check to see if there is a valve under the toilet bowl and turn it off. >>>More
Generally, the toilet flushes once depends on the volume of the toilet tank, and now the singing is to save water, the new toilet is generally 6 liters of the old toilet has 8 liters or even 12 liters, if you want to save water, you can place a drink bottle or brick in the toilet, in order to reduce the amount of flushing, you can also bend the float inside a little down, you can reduce the water output of the toilet tank.
1.Take the lid on the toilet bowl away, whether the small ear pressed by the hand when flushing is stuck, under normal circumstances, the ear will return to its own position when pressed), if it is stuck, the rubber gasket below cannot be reset, and the water has been flowing. >>>More
In the future, if this situation occurs, pour warm boiled water to preheat it, and then add boiling water. The toilet can only be replaced if it cracks, no way, if the water leak is not perfect, it will affect the downstairs, and then it will be more troublesome to ask others to remove the ceiling or something.