What is the kitchen sewer tool called

Puller, also known as plucker (that is, the sink and toilet are blocked with a rubber lid for dredging), a tool for unclogging sewers, made of long handles and rubber bowls, also known as toilet pumps, toilet suctions, toilet toilets, etc.

There are three commonly used tools for unclogging sewers:

1. Spring drill bits.

The more traditional method has a certain technical content, after all, modern tools are used. It feels similar to the principle of the previous drill bit for filling, but there are certain limitations, that is, there are more places to bend the pipe, and it is not easy to use.

Second, the dredger.

Buy a 2-meter pipe dredge on the stall, make some bends at the head 2 cm, put water on the side, extend the dredge into the water outlet, stretch it in while shaking, and then extend it into the dredge at the water inlet while dredged while releasing water, and repeat it several times. At the same time, dredging should be carried out every other week in the future, if professionals come, you can first use manual methods, do not pour water, you can also surround the pool to prevent water splashing. Of course, everything else has to be put away.

And you have to make sure that it is dredged in a short time, otherwise the smell will be very strong.

3. Water plucking.

The drain is filled with water, press down with a leather plug, and then lift it violently, so that a certain pressure and pumping force will be formed, which may wash away the clogged debris.

There are a kind of tools for unclogging sewers.

1. High-pressure air gun. A pneumatic cylinder resembling an oxygen cylinder (though much smaller) with a 40cm metal nozzle attached to it. First, fill the blocked pipe with water to about 10cm away from the pipe mouth, put the metal nozzle into the pipe, and wrap the pipe mouth with a wet towel to seal it.

Turn on the air pressure switch, hear a crisp sound of launching water, and the project is over.

2. Spring drill bit. The more traditional method has a certain technical content, but there are certain limitations, that is, there are many places to bend the pipe, and it is not easy to use.

3. Dredging device. Buy a 2-meter pipe dredger, make some bends at the head 2 cm, put water in the water outlet, reach in the dredge while shaking, and then extend the dredge into the water inlet while dredged, repeat it several times. At the same time, dredging should be carried out every other week in the future, if professionals come, you can first use manual methods, do not pour water, you can also surround the pool to prevent water splashing.

Of course, everything else has to be put away.