-
Anonymous users2024-01-23Step 1: Use a hasty cotton cloth to wipe the dust off the moldy part of the leather sofa. Do not dip cotton cloth in water.
Step 2: Find an old toothbrush that you don't use at home, preferably one with soft bristles. Dip a toothbrush in high liquor and wipe the area with mildew. When wiping, the force should be moderate, too light will not work, too heavy will hurt the sofa itself.
Step 3: Wipe the mold with a clean cotton cloth to allow the wine and mold to evaporate. If the results are not very good, you can repeat the above two steps again.
Step 4: If this method is ineffective, you can dilute ammonia with water 20 times, wipe the mildew that is not easy to wipe off with a cotton cloth, and wait for volatilization to dry, it will be clean.
-
Anonymous users2024-01-22Wipe with a cloth dipped in dish soap and then wipe again with clean water.
-
Anonymous users2024-01-21Apply a little toothpaste on top and brush it with a brush, and wash it with a rag dipped in water.
-
Anonymous users2024-01-20Brush brush, wash after epithelial oil!
-
Anonymous users2024-01-19Wipe with a cloth and take it out to the sun to dry.
Leather sofa mold, in fact, it is quite easy to remove mold, don't worry about oh 1, if it is caused by air humidity, it depends on the situation, mildew is more, the range is relatively large, and the sofa is rotten, this situation will have to find a professional company to repair, if there is not much mildew, the damage is small, you can use the leather sofa reduction repair paste to make up for the damaged place of the sofa, and then apply anti-mildew and antibacterial paste to protect the sofa. >>>More
For leather and leather sofa treatment, first use a rag and a brush to wipe off the mold you see, use a rag or brush dipped in the anti-mold cleaner iHeir-cc to wipe off the dust and dirt on the surface of the product, and then apply the cleaning and anti-mildew care cream iHeir-QF on the leather sofa, which can kill the mold and fungus on the leather sofa, inhibit the growth of mold, and protect the leather sofa. >>>More
The glass glue in the bathroom is moldy, generally wipe it with a rag, if you can't wipe it off, shovel off the moldy place with a blade and replace it with a new glass glue.
Turn off the toilet inlet valve in your home and lift it up, and the backflush ribs will sink out at the bay and be installed after they are clean.
It depends on whether it is the main pipe blockage, or the person in charge of the blockage, if it is in charge of blocking, you can use the skin tiger or pipe pass agent to try. If the main pipe is blocked, it is necessary to use a steel sheet to pass the main pipe.