What to do if the toilet is clogged with a poop

The initial decoration of the bathroom is very important, because the decoration at this time should take into account the problems of waterproof, odor prevention and so on. Many people find that soon after installing the toilet, it will smell, why?

This is what my toilet base looks like after it is disassembled, it has been smelly for three years, so disgusting.

Let's talk about the four main reasons why the toilet stinks:

1. The quality of the toilet product itself is poor, and the void of the toilet is large, and there are a lot of stains left in it.

2. The project was not done well during installation, and the flange ring under the toilet was not sealed.

3. The base of the toilet is not sealed, or the glass glue of the base is not done.

4. There are some firing holes in the toilet base, but these holes are not sealed, and the smell comes out.

The solution of Article 1 is that we can only buy toilet products with better quality, and we can buy better glazed products.

Article 2 suggests that you should use glass glue for the flange, and when you use this kind of glue, you should use water to flush it with water to see if there is any leakage.

Article 3 Most of the toilets that we sleep on now do not use cement to seal the bottom, most of them use glass glue, and we must pay attention to not break it when playing glass glue, and we must play it completely in a whole circle.

The base of the fourth toilet bowl usually has two or three firing holes, and many people don't know about it. Some merchants do not treat the product when it leaves the factory, so after you install it, the smell of the toilet will flow out of the holes here, so we have to seal these holes.

This small suggestion, in fact, installing a toilet is a kind of technical work, even if the worker is skilled, it is not as good as installing it yourself. When you buy a product, you can also let the merchant package install it, so that you can save the installation fee.

It should be noted that if you want to lay the floor tiles and then install the toilet, this is the correct installation sequence.

In the supermarket, there are special toilet powder for sale, buy some at home for backup. When you encounter a blockage, pour a packet into it, pour a pot of hot water after a few hours, and it will be clear once a while when it is not blocked, so that there will be a lot less blockage.

Hope it helps!

Or what's the way? Children are not sensible.

I threw the xylitol bottle into the toilet bowl and flushed it down with water, and only pulled out the paper on the bottle with a water plucker, and the bottle just didn't come out, I really don't know what to do? I hope that friends who know will tell me, thank you for buying a toilet dispenser, or ask a professional to help! After cutting the melon, I mistakenly threw half of the melon away from the toilet, and I didn't realize that it would be blocked, so I flushed it with water, but it was blocked, and then the water slowly couldn't go down, what should I do?

In fact, you can find a half-inch wide bamboo strip and put it into the toilet to dredge it, which can solve the problem. In the unclogging of the toilet bowl with washing.

"Hook it out with wire. After my guests were at my house, the toilet was clogged and it was full of water, and it stinked to death

Ask for help, wow, wow, dredge first, what kind of stirring wire can be used, you can buy it yourself, about ten yuan. If it doesn't work, you have to disassemble it and reinstall it. The current ones are all made of glass glue, which can be disassembled, and if they are packed with cement, then they can only be replaced.

Is that okay?

Abstract You can use the road dredging agent, which is a powdered dredging product that can be used for any pipe dredging, put the dredging agent into three quantities of about 50 grams each time, at an interval of a fifth of an hour, after all the input is finished, stay for a quarter of an hour to flush into the hot water, and then stay for two-thirds of an hour, rinse with clean water, so that after the operation, you can make the clogged toilet flexible.

What to do if the toilet is clogged with a poop

You can use the channel dredging agent, which is a powdered dredging product that can be used for any pipe dredging, put the dredging agent into three amounts of about 50 grams each time, at an interval of a fifth of an hour, and after all the input is finished, stay for a fifth of an hour to flush into the hot water, and then stay for two-thirds of an hour, rinse with clean water, so that after the operation, you can make the clogged toilet flexible.

I wonder if this situation has anything to do with the toilet? For example, water pressure! Not installed! If it matters! How to do it.

As soon as you get on the tuba, it's blocked! Don't block it at other times! Can you analyze the reason, it has nothing to do with water pressure?

It's that the sewers are not unblocked.

It's possible that something fell in and blocked it.

It's just that the flush can go down without completely blocking it.

It's blocked again after the dredge!

You dredged it with a leather puff.

Treat the symptoms but not the root cause.

My own family unloaded the toilet and got it through! After the toilet was installed, the pipe under the toilet was blocked.

Not a problem with the toilet.

Good! Check it out tomorrow! Thank you.