After pasting the wall brick pit distance is only 385mm, how to choose the toilet?

After pasting the wall brick pit distance is only 385mm, how to choose the toilet?

Kiss! Hello, happy to answer your <>

After sticking the wall bricks, the pit distance is only 385mm, how to choose the toilet: In fact, when choosing the toilet, your actual pit spacing of 385mm is also good, because there is no problem with the difference between the pit spacing of the toilet and the actual pit spacing of two or three centimeters, that is, you can also follow it. The actual pit spacing of 400 is selected for the toilet.

Of course, a 300 pit pitch toilet is more suitable, and a 400 pit pitch toilet can also be installed, because we know that the diameter of the toilet drain pipe is very thick, reaching 14 to 16 cm. The diameter of the spout of the second toilet is generally 8 10 cm, so to speak. It is different from the diameter of the actual outlet.

At least 6 centimeters or more, so to speak. The pit distance is 385 plus a distance of five or six centimeters. It is completely over 400, and what you have to resist is that you can choose the toilet that should choose 300.

The reserved pit spacing is 385, which means that the distance from the center point of the sewer pipe to the wall is 385. Between the choice of 300 and the wheel of which 400 I think should be the choice of 300 toilets, and 400 is not suitable for 385 reserved pit spacing. If the toilet with 400 cannot be installed, it will also make the toilet against the wall.

Therefore, the choice of 300 can be installed on the reserved pit spacing. Hope mine can help you <>

Do you have any other questions?

It is best and simple to choose a pit distance of 300mm. But there will be cracks behind the wall.

You can also buy a pit distance of 400mm. Use an electric drill to make a hole by yourself, and make up the hole with marble glue while enlarging the hole, which can also be used. I'll change it, no problem.

I agree with the advice of the experts upstairs to use the 300's, and it doesn't matter if you have a little space later.

Or use the 400's, add a shifter.

Nowadays, the toilet can be changed on the spot, whether it is the front or back water, and the shifter can also provide about 10CM displacement adjustment when installing the toilet. Don't worry, tell the salesperson that you'll be fine, but a very good toilet may not fit because many toilets can't be modified.

It is recommended that the specific situation is best to consult with the decoration company or the distributor of the material market, they are doing this kind of products, they are more familiar, so they will think more comprehensively.

It is recommended that if the downstairs has not been renovated, you can also drill the hole, or use the method of raising the bathroom, which is more troublesome, but then all the sewer positions can be set by yourself.

The distance between the drain pipe of a standard toilet and the wall tiles is between 28-35 cm, no matter how big the toilet is or what brand it is, the distance is floating at this size. In this way, the toilet drain and the reserved drain on the ground will be securely closed. Beyond that distance is troublesome.

IF YOU REACH 275MM, THE TOILET WILL NOT BE CLOSE TO THE WALL, SO THE TOILET WILL NOT BE FIXED. Why didn't you think of this in the first place? The plumber doesn't know the standard distance of the toilet.

With a shifter, the maximum distance can be moved by 10 centimeters. The shifter itself has drawbacks and is prone to clogging. The greater the distance, the narrower the mouth.

Besides, you can't get to the wall with the shifter. The only way is to build a brick on the wall of the toilet with a height of about 1 meter, and the width is wider than the toilet, so that you can also put something on the countertop, such as soap, and other daily necessities for the bathroom. That's the only way.

I can't buy a toilet of this size.

That's right, because the building will be placed, the brand toilet is not allowed to be installed just against the wall, the hydropower master must have said, many developers of the pit distance are left not standardized, my pit distance is just 400, grandma's tile is less than 20, I had to install 30 toilets, and the back is empty for a ......Your pit distance is 275, you can buy a suitable toilet, remember that Lejia's vanadium titanium stand seems to be more than 200 pit spacing, but it is more expensive, look at it yourself.

In addition, the siphon toilet can have a certain degree of displacement, and it is not possible to flush it directly, and it will be blocked by any shifter. If the downstairs has not been renovated, you can also drill the hole, or use the method of raising the bathroom, which is more troublesome, but then all the sewer positions can be set by yourself.

Is this still asking? Take a ruler to decorate the city to sell bathrooms, which one is suitable to buy that!