Eagle toilets do not enter the water. Open the inlet angle valve, and no water comes up from the inl

Updated on Toilet 2024-02-16
1 answers
  1. Anonymous users2024-01-23

    Is there a foreign matter (rust, slag, gravel, etc.) in the water supply device?

Related questions
The toilet inlet valve replenishment pipe does not enter the water
1 answers2024-02-16

The top is to fill the basin with water, and if you can't adjust it, it's dead, and the bottom is to fill the water tank, which can be adjusted, and its level directly affects the amount of the water tank.

The toilet tank inlet angle valve is not tightened
1 answers2024-02-16

The angle valve is leaking, change the angle valve or change the spool.

The toilet bowl does not get water
6 answers2024-02-16

Is the valve open?。。 Is this a new set of drifters??? Press the float on the left to see if it will get into the water, whether the float is too low.

What should I do if the toilet inlet valve does not enter the water after flushing?
3 answers2024-02-16

The float in the tank drives the water inlet valve of the water tank, when the float floats up and the valve is not closed, and the water continues to enter, it must be a problem with the valve, so you have to check the valve, whether the link between the float and the valve is loose, or the valve is broken, and then it is easy to deal with. >>>More

The triangle valve behind the toilet is leaking, and the toilet is still leaking when the toilet is
3 answers2024-02-16

This is not a leak from the triangle valve, but the rubber mat of the hose behind the angle valve is broken, and the leather mat needs to be replaced to fix it.