Is it good to install ceiling fans on a house with a gypsum board ceiling?

There is a wooden keel on the plasterboard, and you can install the ceiling fan on the wooden keel, so that it can be fixed well.

Of course it can be installed:

If the weight of the ceiling fan is average, then at the position to be installed, cut part of the gypsum board, increase the local strengthening keel, and level the gypsum board after installation (scrape the putty after repairing, repair the paint, and no traces can be seen).

If the electric fan to be hung is heavier, it is necessary to cut the gypsum board area is relatively large (a person's head can be stretched into), and then add hanging bars (metal hanging bars) to connect with the ceiling of the original building structure and install the embedded structural parts, seal the top surface, and finally install the ceiling fan on the embedded parts.

Strictly speaking, it is unsafe and unsightly to install a ceiling fan on a gypsum board ceiling, even on a keel. If you really want to install it, it is recommended that there is only one way: first, remove the gypsum board at the installation position and install an expansion hook on the top cement top, with a size of at least 14 mm.

Then hang a 10 mm round steel along the hook to stretch below the top surface of the gypsum, and hook the ceiling fan at the lower end; The hook attached to the ceiling fan should be as small as possible, but it should be safe. First, open a hole of the same size as the hook in the removed gypsum board, install it through the round steel hook, and then hang the ceiling fan.

That's not feasible, that will affect your renovation effect on the one hand, your house has been renovated for a few years, then it will be destroyed. Neither the light steel keel nor the wooden keel can withstand the rotational force of the ceiling fan. If your house is still under renovation, then you can directly punch holes in the top and hang it with anti-theft bolts and screws to reinforce, and you can leave a certain amount of space to prevent the ceiling fan from making a noise when it hits the gypsum board when it rotates.

The roof should have a keel, and then plasterboard! Your ceiling fan must be installed on the keel in order to eat strong gypsum board is not good!

You can't add a ceiling fan to the keel, even the light steel keel can't withstand the swing of the fan, it is easy to bend, or even fall off, you can dig a hole, let the workers go in, make a hole in the ceiling to fix the fan, and then close the hole, but the putty scraped again will be easy to see.

Of course, it is not possible to install a ceiling fan directly on the ceiling! This problem is very easy to solve, as long as the angle steel bracket is installed in advance in the ceiling opening, according to the ceiling elevation, and then make up the gypsum board, so that the ceiling fan is no problem after installation! Safety comes first!

Hello friends, you want to install a ceiling fan on the top of the plaster, I think you can, just install it on the top, install the structure on the ceiling, don't touch the gypsum board and keel, there will be no vibration and strange sound, just for reference I hope it will be useful to you.

It is a mistake to install a ceiling fan on the gypsum board and keel, when the ceiling fan rotates, there will be a certain swinging phenomenon, which will cause the expansion bolts to loosen, and the ceiling itself has a lot of weight, and the ceiling will fall down after a long time. It is better to punch holes in the roof of the wall for special reinforcement, and it is better to fall directly on the roof.

If it doesn't work, the ceiling fan base must be installed on the concrete of the roof, which is unreliable on the wooden keel. Also how big is the size on your keel. If it is at 10CM or steel keel, it can be considered.

It is feasible to install ceiling fans on a house with a plasterboard ceiling. But before making the keel you can install a block wrench in the position of the ceiling fan, the thickness of the wrench should be basically about the same as the height of the keel frame, and then this part of the keel frame is nailed to the wrench, so that people will be solid and safe.

There should be a wooden frame behind the gypsum board, and you can do it on it, but it is estimated that it will not work directly on the gypsum board

It's all layman! Of course, it can be installed: there are several methods, if the weight of the ceiling fan is average, then in the position to be installed, cut part of the gypsum board, increase the local strengthening keel, and fill the gypsum board after installation (scrape the putty after repairing, repair the paint, and no traces can be seen).

If the electric fan to be hung is heavier, it is necessary to cut the gypsum board area is relatively large (a person's head can be stretched into), and then add hanging bars (metal hanging bars) to connect with the ceiling of the original building structure and install the embedded structural parts, seal the top surface, and finally install the ceiling fan on the embedded parts. In short, it will definitely be able to install! As long as you're not afraid of trouble, it's fine.

Or don't install it, you can use a floor fan, in fact, the wind effect of the ceiling fan is average.

You can find the wooden keel, but the wooden keel is not easy to find!!

Cancel this program Danger !! If it must be installed, it is feasible to support a steel pipe from the ceiling through the gypsum board before sealing the gypsum ceiling

It's better not to install so many kinds of tower fans now Wind strong beautiful That is useless Unless the small hotel is in use.

With a high-quality light steel keel, people have no problem falling on it.