-
Anonymous users2024-01-23To put it simply, the place you demolished is not the only load-bearing area in that area, and my understanding is that it cannot be demolished.
-
Anonymous users2024-01-22This may be a load-bearing wall, which cannot be dismantled.
-
Anonymous users2024-01-21Load-bearing walls cannot be dismantled.
Let's talk about the bathroom first: the bathroom should pay attention to these points, one is the layout of various socket switches, general control lighting, exhaust fans and bath bombs and other switches are best arranged outdoors, and bath bombs or exhaust fan sockets with plugs can be arranged in the ceiling to prevent moisture. IT SHOULD BE NOTED THAT IF THE POWER OF THE BATH BOMB IS TOO LARGE, IT IS BEST TO USE 4 SQUARE (MM) COPPER WIRES FOR ITS WIRING, AND CONTROL THEM SEPARATELY; Second, all sockets or switches installed in the bathroom should be equipped with waterproof covers; Again, it is not suitable to install corner sockets (about 30 cm from the ground) in the bathroom, which is unsafe; Fourth, there shall be no joints in the wiring of the bathroom (regardless of open or concealed application). >>>More
The living room is still tiled or in line with the wooden floor, easy to take care of, and the bamboo floor and wooden floor in the bedroom are good!
The black part is a heavy wall, and it is cut off when the door is closed, and it is not a big problem if the floor is not very low.
First of all, whether the old house is made of brick or concrete, the load-bearing walls of the house cannot be easily changed. >>>More
No, this is all in the development cost.
If the charge is a disguised overcharge by the developer. >>>More