My family wants to carry out a second renovation and put the living room and bedroom with laminate f

It can be paved with cement, or it can be leveled with sawdust and foam and cement below, and the cost of the latter is slightly lower than that of cement.

It can also be laid directly, and it needs to be handed over in the living room and bedroom.

Answer: 1. If the living room and bedroom are pasted with floor tiles, use the ash mouth of the brick to level it; Or according to the width of the door sleeve, add a door stone to eliminate the sense of height by using the visual difference.

2 such as laying composite flooring, can be leveled with cement, because the cement is dry paving, and the current house is cast-in-situ floor slab, the load-bearing will not have an impact, generally will not seepage, but if it is an old building with prefabricated panels, because the gap between the prefabricated panels is large, there may be water seepage problems.

You can lay a layer of 2cm thick core board in the bedroom, which can not only level but also enhance the comfort of the feet.

Two methods 1 Raise the floor in the bedroom.

2 is to listen to the ground thinly low.

Two types of flooring can be laid. high PVC flooring. Because this floor is very thin. The low place is paved with a compound. In this way, it can be leveled directly. Convenient.

If your home is not underfloor heating, you can lay an extruded polystyrene board 2cm and then lay a wooden floor, and it is best to use special glue to lay an extruded polystyrene board.

It is recommended to make cement leveling on the floor of the bedroom, so that the living room and bedroom are better paved.