-
Anonymous users2024-01-23This was originally wiped clean by the masters while doing it, and they had to fill the joints after they were done, or they would dry it out and then do the beautiful seams, if these processes were done and there was still residual cement, use a scraper or shovel to get rid of it, but you have to pay attention not to get rid of the floor tiles, and there is also a kind of soaking with industrial sulfuric acid for half an hour, and then using a plastic shovel to remove it, and then rinsing it with clean water, that is, this method smells too big when soaking and rushes the nose, some people can't stand it, it depends on how you choose!
-
Anonymous users2024-01-221. Physical method: shovel!
2. Chemical method: clean with oxalic acid (tile cleaner).
To add: if the quality of the brick is poor, don't use oxalic acid to shovel directly (because the density of poor quality bricks is small, it may penetrate into the bottom and affect the base layer, especially the wall tiles are easy to fall off), of course, the good quality is no problem, but after wiping, be sure to rinse with water.
-
Anonymous users2024-01-21Oxalic acid, or toilet cleaner can also be removed, cement marks can be removed, brush them off first, wait a few minutes, and then rinse with water.
-
Anonymous users2024-01-201. Physical Method: Shovel!
2. Chemical method: clean with oxalic acid (tile cleaner).
DAO added: Don't use oxalic acid to answer directly when the quality of the bricks is poor (because the density of poor quality bricks is small, it may penetrate into the bottom and affect the base layer, especially the wall tiles are easy to fall off), of course, there is no problem with good quality, but after wiping, you must rinse with water.
-
Anonymous users2024-01-19Ask the landlord to clean it with exterior wall cleaner or hydrochloric acid.
For large households, the situation of two bathrooms is generally larger, so that for the situation of more spacious space, the two bathrooms can be treated as different toilets, such as the main bathroom is mainly based on meeting the overall functionality, and the guest bathroom is to be completely coordinated with the overall design space, and the functionality should be concise, so that the basic configuration can be based on basic furniture such as toilets and basins, and if the area is too small, the guest bathroom can consider putting less furniture.
It must be abnormal, hydropower construction is a very important step in the decoration, it is very troublesome to do not do well, life will also bring inconvenience, you have to solve it as soon as possible, and you must be cautious when looking for decoration, more and more, don't be pitted, and the bitterness can not be said, ask more people who have decorated.
The reason for the water leakage is that the waterproof layer before the tiling of your bathroom is not in place, or it is not waterproof at all. There is no good solution to the problem, only to remove the bricks, redo the waterproof layer, and then apply the bricks. If you negotiate with them without results, then take the construction contract signed by both of you and sue the other party to the court, and the court will give you a correct answer.
It is best to choose a wall-mounted type with a bright head. The original lighting line is changed to a bath bomb, and a line may be installed, the original lighting should be a light source, and the bath bomb should have at least two lights, and it is impossible to control two at the same time with a switch; Also, the weight of PVC ceiling is limited, and the general bathroom uses ceiling lamps, which are light in weight, so there is no need to consider special reinforcement when the ceiling is suspended. The bath bomb needs to be concealed, and the original top needs to be removed and reinstalled. Or wall mount it, let them be installed!
It is recommended that you find a professional wolf warrior waterproof master to help you repair it! There will be no water leakage in the future! Hope it helps!