What to pay attention to in bathroom decoration

Bathroom decoration from the following aspects to pay attention to the same. 1. Ceiling: Because the water vapor in the bathroom is heavier, it is necessary to choose those materials with waterproof, anti-corrosion and anti-rust characteristics.

2. Ground: Before laying floor tiles, be sure to do a good job of waterproofing; After the tile is laid, it is necessary to ensure that the brick surface has a drainage slope (generally about 1% is appropriate), and the slope is towards the floor drain; After laying tiles, the ground must be closed water test, and the time must be at least 24 hours; When laying floor tiles, pay attention to the joints and alignment with the wall tiles to ensure the overall sense of the entire bathroom, so as not to produce a cluttered impression visually. 3. Wall:

The tiles on the wall should also be moisture-proof and waterproof, and the tiles should be smooth when pasting, and should be jointed and aligned with the floor tiles to ensure the overall sense of the wall and the ground; If you encounter the outlet of the water supply pipeline, the incision of the tile should be small and appropriate, so that the flange cover on the water feeder can cover the incision and make the appearance perfect. 4. Doors and windows: It is best to have windows in the bathroom to facilitate ventilation; If there are no windows, pay special attention to the details of the door.

In order to prevent the water in the bathroom from overflowing, the door boundary should be slightly higher than the inside of the bathroom; The gap between the bathroom door and the ground should be left a little larger to facilitate the return of air; If it is a sliding door, a layer of waterproofing should be made between the sliding door and the bathroom floor tile. 5. Circuit laying: tin must be hung at the wire joints in the bathroom, and waterproof tape and insulating tape must be wrapped successively to ensure safety; The wire body must be covered with flame retardant pipe; All switches and sockets must have moisture-proof boxes, and the location should also depend on the size and location of the appliance to ensure convenient and reasonable use.

6. Waterway transformation: It is best not to make too many changes to the water supply and drainage lines in the bathroom, if you want to change, it should be determined according to the specific situation, such as the different models of the washing machine, and the location of the water supply and water will be different. 7. Sanitary ware installation:

It is best to remember the distance between the drain holes before decoration, and choose bathtubs, baths, toilets, wash basins and other sanitary ware according to the size, so as not to be inappropriate in the size of the decoration; The installation of the toilet should be sealed with toilet mud first, and then fixed with expansion screws or glass glue, so that it is easy to repair when the toilet is blocked. 8. Ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must be equipped with a retrograde gate to prevent the backflow of dirty air.

9. Greening: add vitality. The bathroom should not be a forgotten corner of greenery.

When decorating, you can choose some shade-tolerant, moisture-loving potted plants to place in the bathroom to make this place a little more lively.

The most important thing to decorate the bathroom is to do a good job of waterproofing, and the most important things to pay attention to are:

The bathroom is the most humid place, and if the waterproof is not done well, it will endanger the neighbors downstairs and cause water leakage, not only to compensate the neighbors for their losses, but also to re-do the waterproofing of the bathroom floor, which is time-consuming and costly.

The bottom line of the overall wall brush waterproofing of the bathroom is three layers of ground and two layers of wall brush, one layer is applied each time, and then the next layer is brushed when it is dry, and one layer cannot be less.

Choose a bathroom floor drain with good sealing effect, because the seal is not good, it is easy to return to smell and cause air pollution.

Integrated ceiling, the bathroom generally chooses integrated ceiling, which not only has a neat and beautiful appearance, but also is energy-saving and safe, and very practical.

The bathroom floor must be tiled, and choose a model with good moisture-proof and anti-slip effect. In order to prevent the elderly or children in the family from falling when entering the bathroom with water.

The floor of the bathroom should be lower than the doorstone of the bathroom, so as to prevent the water from overflowing when taking a bath; The floor drain should be lower than the bathroom floor, and the figure-eight shape is generally selected to facilitate water discharge.

It is better to have windows in the bathroom to use air circulation, and if there are no windows, you can install an exhaust fan to facilitate the exhaust of dirty air in the bathroom. It is advisable to press the retrograde gate to prevent air backflow.

The above are a few precautions about bathroom decoration, or emphasize that waterproofing must be done well, otherwise there will be endless troubles! Waterproofing needs to pay attention to the places include doorstones, floor drains, small water pipes, floor joints, and toilet pipes around the waterproof paint with a small brush several times, these places are the most prone to water leakage.

1. Electricity: It is best to use 4 square wires, and the electric water heater is wired separately.

Second, the line pipe and water pipe must go horizontally and vertically, because after pasting the tile, it may be eye-catching, so as to avoid hitting the wire and water pipe.

3. The floor drain must be selected well to ensure that the water can flow away smoothly.

Fourth, the toilet is equipped with a faucet separately to ensure that the toilet can be repaired without going out after a problem.

Fifth, design the location of the washing machine, toilet and washbasin in advance, and you don't need to ask for the dun cloth pool, you can buy it directly, which is convenient and easy to use and can be moved.

The ground is waterproof, make it thicker, and the wall waterproof is higher.

The power supply should have a dust cover, and the ground should be non-slip.

Waterproof construction should be according to the process requirements, anti-leakage facilities are also a very important part, anti-slip can not be relaxed!

The most important thing in bathroom decoration is waterproofing, and there are a few points that need to be paid attention to when doing waterproofing!

1. Try not to damage the original waterproof layer;

Second, the re-paving of floor tiles should be done to make the ground waterproof;

3. Be sure to do wall waterproofing;

Fourth, after the waterproofing, use the 24-hour "closed water test" to accept the waterproof;

If there is no permeability, it can be considered that the waterproof construction is qualified.

First, waterproof measures (when the hot and cold water is buried, the water is first connected and debugged, and the floor tiles are paved), the second is the design point of the installation hole (probably the division of the functional area in the future), and the third is to lay the horizontal line and the height of the ceiling version.

Fourth, do a good job of the water range of the ground and the specific position of the water.

The most important thing I think is of course waterproofing, otherwise your walls will absorb water and the wall skin will fall off.

Downstairs then added.

Bathroom decoration waterproof must be done well.

Waterproofing is the most important thing, otherwise it will be a big trouble.

The bathroom mainly pays attention to waterproofing, the floor waterproof should be done twice, from the floor to the wall to turn 30cm, after doing a good job must do the water storage test, the bathtub, the wall around the shower must be made meter-high waterproof.