-
Anonymous users2024-01-23Toilet tank fittings are the core part of the toilet, known in the industry as the "heart of the toilet", which is mainly composed of inlet valves, drain valves and buttons. Roughly, it can be divided into two categories: conjoined and split. Siamese fittings are used for Siamese toilets.
Split fittings are used for split toilets. The inlet valve part can be divided into side inlet and bottom inlet, and there is also rear inlet. The drain valve part can be divided into double press type, chain type and bucket type.
The button part can be divided into side buttons, top buttons and front buttons.
-
Anonymous users2024-01-22Toilet fixtures are very convenient to disassemble, but if you haven't done this kind of work, it's inconvenient.
Reasons why the toilet won't drain:
1.Nowadays, a filter will be placed in the toilet tank, and after the filter is used for a long time, it will deteriorate and cause more scale to cause the filter to clog, etc., so it will cause the tap water in the tank to not enter smoothly. >>>More
The principle of toilet water supply is:
1. Use the float to control the water intake, when the water is full, the float floats up and pulls the connecting rod to close the water inlet, and the water stops. >>>More
Can be replaced, my guest bathroom's is also a broken button, just a few days ago on the Internet for a change. If the toilet button is broken, it is likely that the spring inside has lost its elasticity after a long time. When you press it, you don't have the strength to flush the toilet. >>>More
That is the uneven hole under the ceramic water tank, be sure to tighten it, or pad more rubber rings.
It is caused by the high level of the flush toilet and the low level of the tap water.