How can the kitchen faucet 360 rotate after a period of time and can t rotate

Updated on Kitchen 2024-02-19
4 answers
  1. Anonymous users2024-01-23

    How can the faucet 360 rotate for a period of time and not rotate - poor quality, gorgeous appearance and shoddy.

  2. Anonymous users2024-01-22

    This kind of failure is that the rubber pad inside the faucet switch is completely worn, so that the screw and the faucet thread are stuck. So it will start with a 360 rotation and end up stuck.

    This kind of fault is difficult to repair, and it is not expensive to replace it with a new one.

  3. Anonymous users2024-01-21

    The answer to this question is "broken".

  4. Anonymous users2024-01-20

    Install on the left, and on the right, you often have to clean the countertop.

Related questions
The kitchen faucet 360 degree universal rotation elbow is blocked, how to deal with it
1 answers2024-02-19

First, remove the faucet filter and clean it. Second, remove the faucet connection pipe and blow it with your mouth or wrap a small strip of cloth with wire.

Kitchen faucets that don't rotate and still leak?
21 answers2024-02-19

There may be a problem with the sealing ring inside the faucet, once the sealing ring has a crack or the sealing ring cannot recover its elasticity, it will leak.

How to repair the leakage at the rotating place of the kitchen faucet and how to disassemble it?
18 answers2024-02-19

First, loosen the faucet from the bottom of the vegetable basin, remove it and then look at it, and the visual inspection should be the aging and leakage of the leather ring in the middle. >>>More

What to do if there is a leak in the kitchen faucet rotation
2 answers2024-02-19

1. If there is a water leakage or loose closure at the rotating part of the faucet's switch, generally speaking, the internal valve body of the faucet is partially damaged, and the value of maintenance is not large, so it can be replaced; >>>More

How to remove the rotating copper joint in the kitchen high-throw rotary faucet? Thanks a lot!
3 answers2024-02-19

There is a joint on the top and bottom of the swivel head that can be rotated and can be removed with a special wrench. After removing it, use a hex wrench to unscrew the macaroni screws inside.