How to calculate the area of the waterproof layer in the bathroom?

Updated on Bathroom 2024-02-28
4 answers
  1. Anonymous users2024-01-23

    Toilet waterproof area = (floor perimeter door width) floor area.

  2. Anonymous users2024-01-22

    All the ground + wall, the wall shall not be less than meters, and it is appropriate to be meters.

  3. Anonymous users2024-01-21

    Then calculate the waterproof area of the wall, first subtract the area of the integrated ceiling hanging, and then use the perimeter to return 30CM - the width of the door opening 30CM = the waterproof area of the upper return.

  4. Anonymous users2024-01-20

    Qinglong Waterproof Company generally recommends that customers brush the area of the bathroom is: square meters of the ground + 1 meter 8 square meters of the wall.

    You can use Qinglong's polyurethane or JS waterproof coatings. Environmental protection.

Related questions
10 answers2024-02-28

1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More

5 answers2024-02-28

Decoration must not only care about the shape, the good-looking skin is very simple, and the quality of construction is the last word, such as the waterproofing of the bathroom, the top priority. >>>More

6 answers2024-02-28

1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More

1 answers2024-02-28

1. Environmental protection.

If you choose a product that is not environmentally friendly, after the waterproof layer is made, the harmful gases will be slowly released under the thick floor tiles or cement. Therefore, if you want to buy waterproof materials, you must go to the regular building materials store or supermarket, choose a well-known brand, generally good brand products are equipped with product test reports, product certificates and China environmental labeling certification of the ten ring mark or CTC mark. >>>More

6 answers2024-02-28

Toilet leakage is mainly concentrated in the pipe floor drain and around the corner of the wall, and these parts should be focused on when waterproofing. After the waterproof layer is done, the closed water test is carried out for 3 days, and the corresponding parts are carefully observed downstairs, and the decoration is carried out after there is no water leakage.