How to wash the toilet bowl without water traces for a long time

Updated on Toilet 2024-02-20
3 answers
  1. Anonymous users2024-01-23

    Method steps.

    01 Be sure to put a toilet cleaner in the toilet tank:

    Toilet cleaner contains a variety of functions to remove impurities and odors in the toilet, in addition it also has a fragrant smell, we press the button to flush the toilet, the release is always blue water, very beautiful and good-looking, but this is not a vase-like effect, it can really help remove the swag left in the toilet every time we urinate or defecate, and then it can also evolve the smell emitted every time we flush the toilet.

    02Clean the toilet regularly

    The toilet does not mean that we don't need to clean it if we can't see the stolen goods, it doesn't mean that we don't need to clean it if we can't smell the smell, because the toilet contains dirty things that we can't see with the naked eye, and the toilet is the easiest place for bacteria to breed, if we don't develop a good habit of cleaning the toilet regularly, it will have a bad impact on our own health and respiratory tract, so we must clean the toilet regularly.

    Fig] >03

    The water used to flush the toilet bowl each time you dig rice:

    The water of rice is rich in very viscous objects, with the function of absorbing impurities of objects, we may lift the rice water contains sticky objects, if it is placed in the toilet for a long time, it will become smelly, in fact, it is not, because the cleaning function in the rice water is very strong, my family often uses such water to flush the toilet, and then flush it with flushing water, you can achieve the function of decontamination.

  2. Anonymous users2024-01-22

    Drop on the toilet cleaner to soak it, wash it again after a day, don't use steel wool or sandpaper, it will be difficult to scrub the glaze after grinding it off, drop a little more toilet cleaner, and don't rinse it with water before soaking.

  3. Anonymous users2024-01-21

    The best way: Grind off with fine sandpaper. The premise is not to be afraid of getting dirty.

Related questions
3 answers2024-02-20

It is normal for the water in the toilet to be very dirty if it is not used for a long time, because the accumulated dust and the "dead water" that has not been replaced for a long time are combined, so the water in the toilet will be very dirty and even smelly.

1 answers2024-02-20

Yes, soak it with toilet cleaner, wash it again after a day, don't use steel wool balls or sandpaper, it will be difficult to scrub the glaze after grinding it off, drop a little more toilet cleaner, and don't rinse it with water before soaking.

1 answers2024-02-20

To clean the toilet, you can directly use 84 disinfectant, pour it evenly on the top side of the toilet, let it flow down by itself, wait for ten minutes, and gently brush it with a brush, and the water will be flushed. Then, it is generally enough to wash it once every half a month or once a month, or soak it for an hour with Mr. Vermeer, and then brush it with a brush and it will be very clean.

1 answers2024-02-20

Your phenomenon is caused by the high pressure of the feed water, you can properly twist the main valve clockwise, turn off the feed water a little bit, it should be improved.

3 answers2024-02-20

1. Dustproof: cover the toilet lid;

2. Water saving: tighten the triangle valve for water intake; >>>More