-
Anonymous users2024-01-23Problems with toilet fixtures. Adjust the water intake of the sanitary ware first to see if there is any stuck or foreign matter in the sanitary ware, if it cannot get better, you can only replace the sanitary ware.
-
Anonymous users2024-01-22The float can be adjusted downwards appropriately.
How to adjust the toilet (toilet) water piece.
1. Installation and adjustment of water inlet valve. >>>More
It could be that the float valve is broken.
Open the toilet lid, check that the float is in normal position and all parts are in good condition, remove the water inlet valve, and clean all the parts that can be removed with a brush, especially the rubber pad, which is normal after installation. The toilet has been used for a long time, and the inlet valve has accumulated debris and formed a slippery scale, and the air pressure water valve cannot be closed normally if it leaks. >>>More
When the small button is pressed, it consumes three liters of water to urinate and the large button is pressed, and six liters of water is consumed to flush the stool.
Generally, the float valve is broken, and there are several possibilities: the valve stem is broken, the water inside the float is ingress, and the rubber gasket of the valve is damaged! As soon as you open the lid, you will see it at a glance!
Find a pluck to pull it out first, and then find a simple manual dredging machine to dredge it, there is nothing to be afraid of. There is really nothing to tie the old towel and clothes with a rope, stuff it down, and then pull it out, and it also has an effect, and it may take many times to achieve the effect.