How to install the toilet seat

The main function of the toilet lid is to cover the toilet bowl and suppress the odor inside, the toilet lid has a shorter life than the toilet, so it needs to be replaced regularly to keep the toilet bowl the most basic and clean.

1. To replace the toilet seat, first measure the width and length of the toilet seat. Buy a toilet seat of the same size.

>2. Use a wrench to remove the old toilet lid, and the position of the screw cap is generally on the side of the toilet by the water tank.

>3. Check whether the bolts, screws, and buckles of the toilet lid accessories you bought first are in good condition.

>4. Fix the bolt screws and buckles to the bracket.

>5. Plug the bolt into the screw hole and tighten the screw. Prevent the toilet lid from shaking and keep the toilet bowl at its most basic.

Notes: The toilet seat must follow the word reasonable when installing, and it cannot be operated sloppily, otherwise it will not work.

Prepare materials: toilet seat, screws, screwdriver.

1. First put the toilet lid on the toilet, pay attention to align the screw holes of the toilet lid and the toilet.

2. After aligning the screw holes, insert the screws into the screw holes of the toilet lid and toilet.

3. Tighten the screws with a screwdriver.

4. Cover the cap with the screw hole.

5. Done.

Answer: Before replacing, you should first prepare a toilet seat of high quality size. For example, in the installation, if the size of the toilet lid does not match the toilet, or the color is different, even if it looks very unsightly after installation, we must choose the same size according to the original toilet lid of the toilet.

2. After the new toilet lid is ready, the original toilet lid must be removed, generally speaking, behind the toilet seat, that is, at the root of the bottom of the toilet seat, there will be two round screws, which is the fixing point of the toilet seat. And some manufacturers will directly seal it in production, if these two screws are not found, then we can only pick up the cover, and then remove the screws on it, so that the toilet seat can be removed.

3. When the toilet is removed, then we have to install the new toilet cover, according to the same way, we must first determine the specific position of the screws, put the new toilet cover on after alignment, and then install and fix it with a screw cap.

4. After installation, the toilet lid must be cleaned first to avoid affecting our normal installation during installation. After the installation is completed, it is necessary to check whether the toilet lid has been fixed, if the screws are not tightened, then we will have the toilet lid will shake when we use it, and it will directly affect the service life of the toilet, and it will also bring us very inconvenience in use, or you can directly contact the professional installer to help replace the toilet cover when installing it, which is not only convenient and fast, but also the installation effect will be better.

How to install the toilet seat? Come and take a look, but don't say you won't install it.

To install the toilet seat, you need to remove the fixing bolts at the back of the toilet, remove the previous toilet cover, and then replace the new toilet seat with a fixed screw cap. At present, most toilet seats are large and small, as long as the screws at both ends of the toilet are done. However, the size of the toilet bowl must be measured before changing the toilet lid, and the width and length of the screw cap from the toilet lid also need to be determined.

So as not to buy products that do not fit.

If the toilet is not installed, you can install the toilet lid on the back of the toilet, which is more convenient and convenient to install, but if the toilet has been installed and fixed, it is necessary to dig out the installation from the back side, which is more awkward, but it can only be installed in this way.

When installing the toilet seat, some toilet seats are fixed with screws, so you only need to find the screw cap, unscrew the screws with a wrench, and replace them with new ones. The screw cap installed in the open place is easy to unscrew down directly, and the screw cap installed in the dark place is not visible, and it is generally located on the side of the water tank in the toilet, and it can generally be found by touching the direction of the water tank after opening the lid.

Generally, the installation method of different styles of toilet covers is also different, and the position of the bottom end of the toilet lid connected to the toilet bowl is fixed with screws, as long as the hand reaches to the rear position of the toilet, finds the screws on both sides and unscrews it, you can take off the whole cover, and then replace the toilet cover, this way is also simple.

Of course, if these simple removal methods do not work, it is recommended to find a professional repair and installer to replace the toilet seat, and remember not to forcibly disassemble it yourself.

Method 1 of installing the toilet seat.

Find the screw cap, remove it with a live handler, and replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark. In the dark place of the screw cap, inside the toilet bowl against the side of the tank, open the lid.

If you put your hand in it and touch it upwards and in the direction of the tank, you should be able to touch it, but you can't see it.

Method 2 of installing the toilet seat.

Simply remove the fixing bolt on the back of the toilet to replace; When installing, you can operate in the opposite direction. Most toilet seats are large or small, and you can simply adjust the two bolts when installing. However, it is also necessary to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace it.

The inside of the toilet seat is equipped with screw accessories, insert the screws into the screw slot behind the toilet seat, and then align the two small holes on the front of the toilet bowl, and then tighten the screws.

If you need to replace the toilet seat in the bathroom, you need to understand the specific removal and installation. So how to install the toilet seat? PChouse will take you to find out.

1. When replacing the toilet cover, you only need to remove the fixing bolts at the back of the toilet first, then replace the old cover, then replace the new one, and tighten the screws in the opposite direction. While most top-loading toilet seats are large and small, to be sure, measure the appropriate size, the distance between the screw holes, and the width of the toilet seat before replacing them.

2. If you want to remove or replace the toilet seat, just find the screw cap, then remove it with a wrench, and replace it with a new toilet seat. However, some screw caps are easy to find, while others are not easy to find. Therefore, we are required to be more patient when operating, and it will definitely be able to install it.

3. Although the installation method of different toilet seats will be different, in fact, the general method of disassembly or installation is similar. However, if you find that the methods mentioned above do not work, it means that the problem with the toilet is relatively big. But don't worry, it is recommended to find a professional to deal with it.

But don't forcibly disassemble it, otherwise it is easy to cause unnecessary losses and troubles.

Nowadays, many families use toilets, and the following details the method of installing toilet lids:

1. First of all, all the accessories and tools required for installation are ready to facilitate installation.

2. First remove the original cover plate and seat ring on the toilet, save the parts, and then start the preparation for the fixing work, find the punch card, align the two holes on the toilet, adjust the distance, and fix the card plate on the toilet with a fixing nut.

3. There is a square card slot at the bottom of the smart toilet lid, align it with the just-fixed card plate on the toilet, and gently push it in, be sure to push it into place, otherwise the toilet lid will shake left and right.

4. Before installation, you must remember to turn off the water supply valve and drain all the water in the toilet tank.

5. Separate the inlet pipe of the toilet tank from the water valve, then connect the tee joint with the water valve, tighten it, and connect the remaining two joints with the filter of the toilet tank inlet pipe and the tee joint respectively. Connect the filter directly to the water inlet of the bidet body.

6. After the pipeline is connected, plug in the power supply, open the water supply valve, and debug the product to see if there is any water leakage.

Notes:

Originating in the United States, smart toilet seats are used for medical and geriatric care, and were originally set with a warm water flush function. The United States was the first to manufacture smart toilet seats, and later through South Korea, Japan's sanitary ware companies gradually introduced technology to start manufacturing.

When replacing the toilet seat, simply remove the fixing bolt on the rear of the toilet bowl to replace it; When installing, you can operate in the opposite direction. Most toilet seats are large or small, and you can simply adjust the two bolts when installing. Here's how:

1. Measure the size of the toilet: length, width, hole spacing, box spacing, if the end of the toilet is arced, you also need to measure the width of the tail to prevent the end of the newly bought toilet lid from being stuck and unable to open and close.

2. Lower lock type. Unscrew the nut on the bottom of the toilet bowl to remove it.

3. See if there is a button at the end of the toilet lid, press the button to pull out the toilet bowl parallel to the front end, and pull it out directly parallel to the front end if there is no button.

4. Take out the MOEXT toilet lid and fixing accessories, and confirm that the lower lock accessories are complete. (Accessories: 1 pair of plastic bearings, 1 pair of screws, 1 pair of lower lock gaskets, 1 pair of lower lock bolts, 1 pair of decorative covers).

5. Put the screw into the plastic bearing and place it on the toilet installation hole.

6. Put the gasket on the plastic nut, press the top of the screw with one hand, and screw the nut to 9 minutes from the bottom of the toilet with the other hand, so that the bearing can also be slightly loosened, the screw is longer, and it should be rotated for a while, and the right practice is the same.

7. Insert the two small holes of the cover plate vertically with the support column, adjust the cover plate to the left and right sides to make it perfectly match the toilet, and then lock the bolts on both sides by hand so that the support no longer moves.

8. Lift the cover, press the button in front of the cover, remove the cover vertically, and use a Phillips screwdriver to strengthen the screws to make them completely tight.

9. The stainless steel decorative cover is sleeved on the bearing.

10. Replace the cover plate again, check whether the slow lowering function of the cover plate is normal, and the installation is completed.