-
Anonymous users2024-01-23Fill in the defects first, then sand the object lightly, then do a good job of hygiene, and then apply two to three times of polyester transparent bottom or white primer, preferably white bottom, each time to sand, and finally two to three times of polyester white topcoat.
Precautions when painting.
1. The requirements for protection and closure work are particularly high. There are two aspects here, one is that the environment should be as dust-free as possible;The second is to protect after painting and do not damage the paint film.
2. All high-grade varnishes are used, and special color essence is used for color mixing, and organic pigments must be used for color essence, and inorganic pigments cannot be used.
3. Use different color ratios, spray 5-8 samples, choose the model with satisfactory tone, and then prepare the paint according to the fixed ratio, and not too much each time, and finally start spraying.
4. During the spraying process, the change and contrast of the color difference on the paint surface should be observed at any time, and the color difference should be adjusted by using the residence time of the spray gun or the number of spraying times to make the surface paint tone consistent.
5. Every 1-2 sprays of paint, it is required to be polished once, and water sandpaper must be used when grinding, gradually increased from No. 300 to No. 1000, and a small amount of water should be dipped in water when grinding. The surface should be cleaned after sanding.
6. Generally, it needs to be sprayed 5-8 times, and the last 1-2 times of topcoat can not be added, so that the decorative effect of the paint surface can have a sense of hierarchy and three-dimensionality.
Hello、Wooden panel furniture spray white paint is the same practice、(Ash - spray primer - sanding - spray topcoat)。。 Thank you for adopting...
First of all, it must be a dust-free and clean environment, don't let the furniture stain with slag, sawdust or something, and be sure to spread newspapers on the ground, otherwise the post-processing is very troublesome, and other processes, the master will do very well.
Your master's current practice is a more common and common practice. >>>More
The primer should be painted first, then painted, and sanded with water sandpaper. >>>More
After the primer is sprayed, it is necessary to sand, and then spray the primer again, so that the surface of the furniture is smooth. After the first coat is sprayed, it is also to be sanded, and only the last coat of paint is sprayed without grinding.