If you want to build a kitchen, do you stick the floor and walls first, and then install electricity

Updated on Kitchen 2024-02-29
4 answers
  1. Anonymous users2024-01-23

    Design the cabinet first and confirm the location of the water and electricity.

    Then lay out the plumbing.

    Floor tile ceiling. Range hood cabinets.

  2. Anonymous users2024-01-22

    Install water and electricity first, and then leave as many outlets as you need.

  3. Anonymous users2024-01-21

    Finally, install water and electricity before sticking to the wall.

  4. Anonymous users2024-01-20

    First change the water and electricity, then do waterproofing and do a closed water test, and finally stick to the wall and pave the floor.

Related questions
2 answers2024-02-29

The ceiling is suspended first and then the floor tiles are paved, and the construction of floor tiles in turn is not good for protection.

13 answers2024-02-29

Kitchen decoration, is it the ceiling or the cabinets first? You'll understand after reading it! >>>More

1 answers2024-02-29

If the kitchen wall is a load-bearing wall, it cannot be knocked on resolutely, after all, the safety of the building structure is the most important, which is related to the life safety of the residents of the whole building, and cannot be demolished. At the same time, from the perspective of gas safety, the open kitchen is not a safe design, not only the oil smoke is polluted everywhere, in case of gas leakage, the gas will quickly fill the whole house, and people who sleep at night will inhale slowly and die in their sleep.

4 answers2024-02-29

Try not to alter it. Some of the drip goes differently.

The drip in the kitchen has a special type for drainage. >>>More

8 answers2024-02-29

Yes, some people in order to save the ceiling area, on the top of the cabinet that has been installed first, the wooden strips are used to fix the corners of the ceiling, but the formal practice is to first hang the ceiling and then make the cabinet, so that it will not step on the countertop, will not scratch the door panel.