Gas water heater in the kitchen, kitchen and another bathroom have hot water, and the master bedroom

The first two are good, but when looking for the cause of the blockage, first look at the filter of the faucet outlet, this place is more likely to be blocked, it is convenient to unscrew down for inspection, this place problem is ruled out, and then consider the pipe problem.

The problem should appear in the location of the master bedroom pipeline, it may be that the master bedroom pipe is blocked, resulting in the reduction of water flow can not make the gas water heater reach the starting condition, you need to find someone to pass the water pipe, the cost is not easy to say, and the labor is different in different places;

The problem you mentioned has nothing to do with the gas water heater, because the hot water in your other bathroom and kitchen can be used normally, which means that there is no problem with the gas water heater. Thank you!

The master bedroom bathroom uses a lot of hot water, so there is more scale accumulated in the pipeline, and the water resistance is larger, so the water is small. At the same time, due to the large resistance of the water flow, the water-gas linkage device misjudges that the hot water valve is closed, so the gas channel is closed, and the fire is not ignited, and of course there will be no hot water. In this case, it is generally accompanied by unstable water temperature, high and low phenomenon, because the internal water heater has more scaling.

The solution is to remove the scale, you don't need to find after-sales, you can do it yourself, you can use the gas water heater on the Internet to remove the scale without removing the scale to inject the descaling agent can be solved, simple and convenient.