-
Anonymous users2024-01-23Check whether the water pipe fittings will leak first, and apply waterproofing agent to the tile joints in the bathroom; Find a waterproof professional to fill the roof of the downstairs bathroom, these have no effect, knock out the bathroom to find the leakage, and do waterproofing after repair.
-
Anonymous users2024-01-22Buying a small bag of waterproofing agent is actually high-grade cement pre-mixed with very fine quartz sand. About 1 kilogram, 15 yuan. If the color of the cement is dark and affects the overall appearance of the bathroom, there is also a white tile caulk, which looks the same as white ash, and is produced in Tianjin, a small bag of 10 yuan a kilogram.
Both are similar in terms of usage: mix them with water to form a sticky paste and rub them over the gaps. Finally, use your index finger to wipe it, and then stick it to the tile next to it and wipe it off with a dry rag after it dries slightly.
After a little waiting, the water gradually decreases and there is no need to repair it. The trend is not reduced, and it needs to be repaired, but don't be so blind when repairing, carefully suppress and test the water, and only after determining can the wall or ground be restored.
Bathroom leakage is a big problem, mainly affecting the life of your downstairs neighbors, at present, the best way is to find a professional waterproofing to knock the floor open, do a new waterproofing, don't look for guerrillas, which is to fool people, find friends to introduce it.
The solution: if the sewer pipe is cracked, replace it, if it is a crack in the floor tile, you can apply silicone, so that you don't have to smash the floor, but applying silicone is not a long-term solution.
You can remove the tiles in the waterproof part of the door (you can extend inward to remove a few more pieces) and redo the waterproofing. Then do a 24-hour water storage test, the water storage height is the highest 20 30mm, if the inspection is qualified to carry out the laying of tiles, pay attention to the new waterproof layer must be protected in the paving process, so that we can avoid the second water storage test. However, if the water storage test shows that the waterproof layer is still leaking, then there is no way you have to remove all the bathroom floors and re-waterproof.
Thorough method: Remove the floor tiles and the bottom layer of wall tiles, remove the floor tiles to expose the original ground, and use a double group.
Parts of the waterproof mortar to do, and then do a 24-hour closed water test to check whether there is water leakage downstairs, if there is a problem.
Continue until it doesn't leak.
How long does it take for a new house to move in without furnitureGenerally, it takes about 2 months to move in to be safe. >>>More
First of all, whether your sewer pipe is a main pipe, if it is a main pipe, as long as it is not broken because of your reasons, the property will be responsible; Secondly, if it is a branch, you are still responsible for it
You first have to remove the putty layer at the crack, and make the gap appropriately larger, and then fill it with caulking putty, and then use white latex to stick the bandage to the gap, and when the bandage is dry, you can use ordinary putty to scrape and level it. Wait until the putty is dry, then sand it with an abrasive cloth and then brush it with latex paint.
If there is a peculiar smell in the bathroom, you have to check it one by one: >>>More
If there is a smell, there are several cases.
1, like you said that the pvc pipe does not reach the ground, the dirty water seeps into the base cement, this situation exists, but it is not a matter of floor drain, it is the drain of the toilet in addition to the problem, the water in the floor drain can only be foul in a few days before it can be stenched, and the smell of the basic bathroom is the smell of ammonia from the toilet. The solution is to remove the toilet bowl and drain the toilet bowl and then treat it with the plugging king (high-efficiency plugging cement). >>>More