How much is the sewer partition of the toilet in the bathroom?

The spacing between the toilet toilet water pipe and the wall is generally 650mm, according to the sewage outlet of the installed product in the appropriate position from the wall to reserve the sewer pipe and determine the distance between the sewer pipe entrance and the ground, the depth of the pit to be reserved under the ground to install the squatting toilet is greater than the height of the squatting toilet, and the connecting rubber plug should be put into the inlet hole of the squatting toilet to prevent water leakage.

Generally, there are 300mm, 350mm, 400mm, 450mm, etc. - owner's home.

Can be shifted! It needs to be redone for waterproofing, and S Bay is deodorized by S structure! It's not easy to block, but it's easier to take out the gambling object, because S Bay can be unscrewed! It can go straight down, it's not that complicated, and keep the plane of the ground slightly inclined to the floor drain, which has nothing to do with your takeover. >>>More

This is the 20 elbow of PPR, you need to cut off the PPR pipe, re-hot melt, there is no other way, because you take any glue, the tape is useless, maybe sealed, but it will not take long and it will leak, the gain outweighs the loss, so you have to smash the wall along the direction of the water pipe, expose the water pipe, and then cut off the PPR pipe, and take the fuser again. In fact, an elbow is about 2 yuan, but if you find someone to install, it will cost more than 2 yuan, because you also have to open the wall cracks, so I suggest that you have better smash the wall along the direction of the water pipe, and call a hydropower to pick it up, so that you can spend less money. I'm from Huai'an, and if you're here, I can help you out.

The diameter of the toilet sewer pipe is 110mm;

The diameter of the floor drain and other sewer pipes is generally 50mm, and the upper and lower risers are 75mm. >>>More