-
Anonymous users2024-01-23Are you sure the valve is really tight? Or is the valve broken? The toilet leaks and removes it to see if the seal is aging or the button is stuck in the pipe wall.
-
Anonymous users2024-01-22Fair Cup to find out? The principle is similar, relying on atmospheric pressure to maintain the water level.
-
Anonymous users2024-01-21The flush toilet running water comes from the sump tank.
-
Anonymous users2024-01-20This is because your valve is not completely closed, so this is still tap water in, if it does not move like this, it is also good, the first water inlet is silent, and the second can save water.
Hello! If it doesn't leak out, that's normal.
If there is no water in the toilet, where does the water come from when you flush the toilet? Flush toilets are automatically pumped, and if there is no water in the bucket after flushing the toilet, it will automatically pump water, so it is normal for the toilet to have water in it and it is full, and if it is full and flows out, there is a problem with the pumping system. It's normal if it doesn't come out. >>>More
If the water leaks, find a special person to repair it, and it should be replaced ......
Have you never seen a float flush toilet tank, go to the toilet and open the lid to take a look. It is just an air balloon floating in the water, on top of which is a connecting rod with a rotating shaft, to which a rope is tied, and the other end of the rope is tied to the valve of the tank, and that's it.
Generally, the toilet flushes once depends on the volume of the toilet tank, and now the singing is to save water, the new toilet is generally 6 liters of the old toilet has 8 liters or even 12 liters, if you want to save water, you can place a drink bottle or brick in the toilet, in order to reduce the amount of flushing, you can also bend the float inside a little down, you can reduce the water output of the toilet tank.
It is caused by the high level of the flush toilet and the low level of the tap water.