-
Anonymous users2024-01-23To do waterproofing, you need to do it on the front of the water.
No need to knock bricks. Dig the best permeable waterproofing can be done by yourself.
If the cement surface is waterproofed, use a super permeable waterproof guard to do waterproofing (if there are cracks, gaps and potholes on the cement surface, fill the complete with Meiding porcelain glue and then do waterproofing).
For the tile surface, first check whether the filling of the tile gap is complete (if the filling of the tile gap is incomplete, fill it with Meiding porcelain glue, and then use a stone tile waterproof guard to do waterproofing).
It is recommended to redo the waterproofing. Because the effect of local single-point leakage is poor, there will be the possibility of water leakage in the future, now it is to find the problem in time when doing waterproofing, and it is better to remedy, if the tile is paved again after leakage, it is more troublesome to repair. >>>More
1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More
Bathroom waterproof leakage repair method: If it is caused by the leakage of the waterproof layer, then the original tile needs to be removed and the base surface cleaned. After the cement mortar is proportioned, the ground is leveled and further waterproofed. >>>More
Apply water repellent to the leaky floor. Before applying, make sure that the ground is clean and dry, and then apply waterproof paste, apply all the places that may leak, and wait for the waterproof paste to dry and then carry out closed water acceptance. >>>More
First of all, it is necessary to find the location of the water leakage, there are usually two situations of water leakage in the bathroom, one is water seepage on the ground, and the other is water leakage caused by broken water pipes. If it is water seepage on the ground, the waterproof layer needs to be redone; A new type of penetrating waterproofing agent can be used to re-waterproof the surface of the restroom, so that the water does not enter the ground and flows directly out of the waterway. If the pipe is leaking, the only way to do it is to change the pipe by planing the tiles and re-waterproofing.