What to do if there is a crack in the potty of the squat toilet

If the crack is not big, you can wipe the urinal with a dry rag and apply it with white cement or white grout, and wait for the night to do not use it first, and then use it the next day, which should be able to solve the problem.

How to use tile grout:

1. When the tile grout is used, when the caulk is firmly glued, the joint should be cleaned first, and there will be no debris and stagnant water;

2. Add water to the caulk according to the ratio of powder and water ratio of 4:1, stir evenly until there is a uniform paste without green groups, let it stand for 10 minutes, and stir it again to use;

3. Squeeze the mixed Tancha caulk along the diagonal direction of the masonry into the reserved gap, do not leave it empty, scrape off the excess slurry with the action of forming an oblique angle with the gap, and carefully avoid bringing out the slurry embedded in the gap;

4. After the caulk is initially cured, use a slightly damp sponge to clean up the excess caulk on the surface of the tile, and further press the caulk so that the caulk is dense and the surface is smooth;

After a few hours, after the caulk socks are dry, use a sponge or a clean cotton cloth to do further cleaning, wipe the surface of the masonry and remove the residual caulk.

If the crack is not big, you can wipe the urinal dry with a dry rag, apply white cement or white grout, wait for the night and do not use it first, and then use it the next day, it should be able to solve.

How to use tile grout:

1. When the tile grout is used, when the caulk is firmly glued, the joint should be cleaned first, and there will be no debris and stagnant water;

2. Add water to the caulk according to the ratio of powder and water ratio of 4:1, stir evenly until there is a uniform paste without green groups, let it stand for 10 minutes, and stir it again to use;

3. Squeeze the mixed caulk diagonally into the reserved gap along the diagonal direction of the masonry, do not leave it empty, scrape off the excess slurry with the action of forming an oblique angle with the gap, and carefully avoid bringing out the slurry embedded in the gap;

4. After the caulk is initially cured, use a slightly damp sponge to clean up the excess caulk on the surface of the tile, and further press the caulk so that the caulk is dense and the surface is smooth;

After hours, after the caulk is dry, do further cleaning with a sponge or a clean cotton cloth to wipe down the masonry surface and remove the residual caulk.

If the crack is not big, you can wipe the urinal with a dry rag, use white cement or the "plugging spirit" sold in the market to plug the crack after it, wait for the last night and don't use it again, and then use it the next day, it should be able to solve. If the crack is large, it is advisable to replace the squatting toilet.

Go to the hardware store and buy some white grout, and you can't see it if you don't take a closer look. Cheap 5 bucks a bag.

Other netizens are right, but when you are a student, you rarely have the opportunity to go outside, so take the time to go to the hardware store and building materials store and ask. If you can't find it, run a few more.

Some of them are sold on Taobao with caulk, like toothpaste.

It is advisable to replace it as soon as possible, as the water pipe may break later.

Use a little white cement to solve it, and buy building materials that you can buy.

Try the special glue for toilet bowl breakage repair, like toothpaste, I used it before, but I forgot the name.

I'm just worried that if the seam is too fine, you can pour it in?