How much is a square meter of light steel keel ceiling

Light steel keel ceiling that is.

The ceiling we often see is a more common ceiling decoration material. The price of light steel keel ceiling is generally 45 yuan a square, but it also depends on the specific use of materials, if the materials used are better, such as the use of national standard light steel keel and thicker gypsum board, it may be slightly more expensive a few dollars a square, I hope the above content can help you.

As of December 2019, the quality of light steel keel gypsum board ceilings is different, and the price is different.

In general, we can divide its decoration price according to three grades. The price per square meter of low-grade light steel keel gypsum board is generally about 50 yuan.

If you attach great importance to this part of the ceiling decoration, you can use mid-range decoration materials. In fact, it is very suitable to use international standard light steel keel ceiling plates, because these materials are not only functional, but also of very good quality.

In addition to creating a healthy home environment, it can also play a role in moisture-proof, heat insulation, fire prevention and other functions. According to the survey, the total cost of this decoration material and labor cost per square meter is generally about 80 yuan.

In fact, the high-grade materials in people's mouths are all the best materials, such as the best construction, the best design, the best raw materials, and so on. For ordinary people, gypsum board ceilings can be as long as they can give people a simple and generous feeling, but for those owners who are very demanding, in addition to the quality of the ceiling materials to be excellent, they must also be beautiful enough.

Under normal circumstances, the more complex the ceiling, the higher the price, and the price per square meter of the high-end light steel keel gypsum board ceiling is generally between 120 yuan and 250 yuan.

Ordinary flat ceiling artificial 25 yuan m2, light steel keel + gypsum board material about 25 28 yuan m2.

Hello, dear, the modeling ceiling depends on the degree of complexity, but also depends on the size of the area, the area is less and the price is high.

1.The cost price of ordinary light steel keel gypsum board ceiling is 110 yuan, without paint, including paint plus 25 yuan. This is the cost price. Light steel keel double-sided sealed gypsum board, without paint to 100 yuan, the same cost price.

2.Ordinary flat ceiling artificial 25 yuan m2, light steel keel + gypsum board material about 25 28 yuan m2.

Now the light steel keel ceiling on the market is generally 30-40 square meters, of course, the price of different quality keel ceilings is not the same, now we will understand the installation method of light steel keel ceilings!

1. Install the boom.

When the floor slab is a prefabricated slab, the steel hook of the suspension boom has been embedded in the slab joint, as long as the upper end of the boom is bent and twisted through the hook hole. When the floor slab is a cast-in-place slab, the position line of the embedded parts should be released at the bottom of the floor slab, the embedded parts should be nailed to the bottom of the floor slab with nails, and the upper end of the boom should be bent and twisted through the hanging ring hole on the embedded parts.

2. Install a large keel.

The large keel vertical hanger is set on the dog keel as a number, and the big keel is handed up, so that the lower end of the boom is penetrated into the upper hole of the large keel vertical hanger, and the nut is initially screwed. According to the height of the arch of the sharp point in the ceiling of the room (generally 2:0 of the short span of the room), calculate the arching value at each hanging point of the large keel, twist the nut to make the whole arch value of the large keel, and after the adjustment, fasten the vertical hanging piece of the large keel.

3. Install the keel.

Put the vertical hanging piece of the middle keel on the large keel, hand the middle keel up, and make the middle keel buckle the vertical hanging piece of the middle keel. If the middle keel intersects with the cross brace, then the middle keel plane connector is placed on the middle keel, and the cross brace buckles the middle keel plane connector.

The price of light steel keel ceiling and the construction steps have been introduced, have you understood? For the light steel keel ceiling price, you can choose according to your needs.