How to remove mold in the bathroom

The humidity of the bathroom is high, and it is easy to breed mold, especially in the rainy season of the Spring Festival, if it is not cleaned and maintained in time, it will be easy for bacteria to swarm and affect people's health. Cleaning and maintaining the wall can not only avoid mold on the bathroom wall, but also prevent cracks on the wall.

1. Non-mildew stain treatment on the wall.

Once you find that there is a stain on the wall of the bathroom, you should remove it in time. If the wall is water-resistant, you can scrub it with a cloth and then dry it with a dry towel, while if the wall is not water-resistant, you need to use an eraser or a towel dipped in some cleaning solution to wring it out and wipe it gently. Some sturdy walls are more difficult to remove stains using the above methods, so you can use fine sandpaper to gently wipe away the stains, and then use wall paint to fill the defects.

2. Treatment of mold stains on the wall.

Even ventilated walls are susceptible to mold erosion when there is a lot of rain in spring, and for white walls, bleach can effectively remove mildew from the walls and disinfect them. For other paint colors, it is best to use a professional wall mold remover.

3. Crack treatment of painted wall.

Sudden climate change is easy to crack the wall surface, shovel out the cracks, and then repair them with the same color paint, and then use sandpaper to smooth out the joints of the old and new paint. It is not difficult to repair the cracked wall, but if the crack is high, it can be a bit difficult. Therefore, it is best to pay attention to the maintenance of the wall, and it is best to open the doors and windows from time to time to adjust the indoor temperature and humidity in the hot and rainy summer, so as to reduce the occurrence of wall cracks caused by sudden weather changes.

If it is cleaned once and then it continues to grow, it is not that the method used is wrong, but that your bathroom has been in a damp and mildew-prone condition. If you want to solve this situation. It is necessary to keep it hygienically dry after each clean-up.

For example, after taking a shower, you must dry the floor in time, and you should also use a dry mop to dry your hands and mop the floor. In this way, it will be completely solved.

Room temperature of 25 to 35 degrees Celsius, relative humidity of about 70 is the best conditions for mold growth and reproduction, so the rainy Huangmei season is the peak of its rage. From eczema, nail fungus, athlete's foot to vaginal itching, mold is the culprit, mold can also produce toxins that are very harmful to the human body, such as eating aflatoxin-contaminated food can induce liver cancer, and some molds can also cause fungal pneumonia, asthma and other diseases.

Generally, the air conditioners and dehumidifiers installed in the living room and bedroom are the breeding ground for mold and bacteria. The bathroom, because it is often wet, provides the best conditions for the growth of mold and bacteria, so the bathroom floor tiles and dead corners of the walls, shower curtains, shower heads and towels that are wet all day long are the favorite places for mold. In summer, food and utensils stored in the kitchen will grow green, yellow or black mold spots and emit an unpleasant smell due to long-term storage or moisture, which is also the result of mold contamination.

Mold is most afraid of dryness and heat, so in order to prevent mold contamination, you should pay attention to cleaning the dead corners of the kitchen and bathroom when cleaning, and wipe dry in time after cleaning. Bleach can be used to kill mold if necessary. Of course, the dehumidifier also needs to be cleaned, which is where mold lingers.

In addition, pay attention to keep the room ventilated and dry, dehumidify if necessary, and turn on the exhaust fan every time you take a shower to reduce the humidity in the bathroom. Towels can be left outside to dry after use. If the weather is bad and the clothes cannot be dried, they should also be placed in a ventilated place, and if they are ironed after drying, they can basically kill the fungus.

Special care: 1. Mold and other miscellaneous bacteria are mutually reinforcing, if other bacteria are eliminated, it will be its turn to succeed. Therefore, it is not a good thing to use too much disinfectant too often, not only does it not kill the mold, but also kills its "natural enemies", in fact, the best way to eliminate mold is exposure.

2. The cleaning should not only eliminate germs, but also clean up personal items, such as disposable underwear, sanitary napkins, sanitary pads, etc. Many people are accustomed to buying a lot of them when they are on sale or giving away gifts, but in fact, these things have an expiration date, and the sooner they are used, the more hygienic they are, and these things are usually placed in the bathroom without sunlight and humidity all day long, which is easy to breed mold.

Hope it helps!

Solve mold stains in the kitchen and bathroom at home.

The bathroom is the most humid, and ordinary mold removal methods cannot effectively inhibit mold growth. You can try to use mold without shadow, you can remove mold in 5 minutes, and you can also prevent mold recurrence, in addition to the bathroom, you can also use it for moldy walls at home. If it is a wall covering, you can try spraying it in an inconspicuous place to see if it will fade.

Soak an old towel or cloth with 100% bleach (100% JAVEX) and then soak it on the green mold, wipe it off with a trowel or dry cloth after 4 hours, and wipe it again with vinegar to clean it! If you want to be clean every day and don't want to see mold anymore, go to the pharmacy and buy a bottle: spray 99% medicinal alcohol every 3 days, and mold will be sent away from you forever!