-
Anonymous users2024-01-23I DON'T KNOW HOW FAR TO THE FLOOR DRAIN, HOW BIG IS THE HEIGHT DIFFERENCE FROM THE CORNER OF THE WALL TO THE FLOOR DRAIN, IF IT IS NOT LARGE, IT CAN BE PROCESSED ONLY WITHIN 8MM, YOU CALL A MASON, BRING A CUTTING MACHINE, FROM THE STAGNANT WATER TO THE FLOOR DRAIN, CUT 10MM OF THE SEAM AT THE FLOOR TILE JOINT, CUT THE CORNER OF THE HIGH GROUND DRAIN IS LOW, AFTER CUTTING THE JOINTS WITH A PLUGGING AGENT, THE MASON IS REQUIRED TO BE FINE WHEN CUTTING, DO NOT DESTROY THE FLOOR TILES. It can solve the problem of no water accumulation on the corners.
Dig the best permeable waterproofing can be done by yourself. >>>More
1. Cut a small piece with thin stockings (the thinner the better, the thicker it will affect the water), stretch it as far as possible, and fix it on the floor drain. In this way, the hair is all gathered on the stockings, and the stockings are thrown away along with the hair when cleaning so that the hair does not go into the floor drain. (Effective prevention). >>>More
The main thing is to treat the wall tile joints, the general grout is not waterproof, and then spray the waterproof sealing paint on the entire wall, which is to prevent moisture, and the bath water generally cannot enter it, but the moisture can enter! We've handled many of these cases in this way, and all of them have been successful!
Find a chisel and use the chisel to make a 2-3 cm wide annular groove around the floor drain. The depth is about 3 cm. However, if there are loose or gaps around the pipe during the slotting process, it should continue to be chiseled. >>>More
1. If there is a problem with the water pipe, the damaged water pipe should be replaced. If you choose some brands, the quality will be guaranteed, and there will be a guarantee of quality, and there will be no quality problems for a long time, which is more guaranteed. >>>More