How to calculate the area of bathroom wall tiles?

Calculation of wall tile area:

1. Bathroom perimeter x room height = interior wall tile area.

2. Bathroom length x width = bathroom floor tile area.

3. If it is a non-professional owner, it is recommended to calculate a rough calculation. Generally, it is a little more than twice the land area.

The floor area is divided by the area of each floor tile, 600*600 is the square, and 800*800 is the square.

The number of kicking angles is the perimeter divided by the length of the bricks (600 bricks with 600 long boards, 800 bricks with 800 long boards) plus 4 or 5, and the wall tiles are multiplied by the perimeter (floor height - ceiling height) in general meters, and then subtract the area of the door, and the windows do not need to be reduced, because there is loss. Divide the wall area by the wall tile area, 300*450 is the square.

1. Calculation of wall tile area: bathroom perimeter x room height = interior wall tile area; Bathroom length x width = bathroom tile area.

2. Give an example to be more straightforward:

The toilet floor is 2 meters long, 2 meters wide, 3 meters high, the toilet floor area is 4 square meters, the wall area = 18 square meters - the area of the toilet door - the area of the toilet window, and the wall is only 16 square meters.

It depends on what size tile to buy.

If you buy 30*45 cm bricks, then the area of this brick is squared, and the bricks needed for the wall: (16 bricks).

Because it is necessary to wrap the sewer pipe, there is cutting, buy a few more pieces to reserve.

The floor is generally 30*30 square bricks, and the number of floor tiles: 4 bricks needed for the kitchen can be obtained in the same way.

I just finished pasting the floor tiles, when I bought the floor tiles, the little girl said to me, you just need to tell me the floor area of the bathroom, I will help you match, I told her how long, how wide, and then sent the floor tiles over, after pasting, there are 3 more pieces. Anyway, you can return it if you have more.,It's good to return it at the end of the installation in the future.。。 In fact, the calculation method is also very simple, I estimate Oh, is to add up the length and width of the ground after multiplying by two, and then multiply the height of the bathroom (generally calculated by two meters four,,) It is said that the area of the door and window of the bathroom should also be reduced, but considering that the window sill and door frame also need bricks, and the corner of the wall of the bathroom, it needs to be cut, so, it should be.

Multiply the length and width of the bathroom by two, and then multiply the height of the bathroom.

This is only a rough approach, and perhaps both the salesperson and the installer know a little better. Ask your workers to know better.

There is no formula, as long as the length and width of each wall and the size of the surface tiles are arranged, and the elements such as whether the surface tiles are parquet or not, there will be results.

The wall area is subtracted from the area of doors and windows, and then divided by the area of each wall brick, and the corner edge cutting loss is added.

For example, the kitchen is 3 meters long and 3 meters wide. 3 meters high. The wall area should be the perimeter of the kitchen multiplied by the height (and then the area excluding the doors and windows is about 31.

It mainly depends on the size of your window. The area of the door is basically more than one square meter. In the end, the wall is about 22 square meters.

The ground area is one square. Then divide the wall area by the area of the brick you have chosen. Such as:

Bricks are 300*450= The same goes for the ground. The same is true for the bathroom.

The photosensitive ceramic tile processing data management system is specially engaged in this, and the calculation accuracy can reach the above, which is very accurate and trustworthy. You can refer to it, I hope it will be helpful to you.

The decoration of the bathroom is generally adapted to the decoration style of the whole house, and the laying of porcelain tiles in the bathroom is the focus of the decoration style of the whole bathroom. Don't look at the small area of the bathroom, but there are a lot of porcelain tiles needed, therefore, the calculation method of bathroom wall tiles is not complicated, but before decoration, it is still necessary to understand the calculation method of bathroom wall tiles, as well as the key points of wall tiles, in order to save more time and money.

The usual budget for bathroom wall tile calculation is calculated in two parts. First, according to the decoration area, the algorithm is: the number of square meters of bathroom wall tiles required for decoration + 5% scraps + 5% margin = porcelain required for decoration.

The second is calculated according to the size and area of the bathroom wall tiles to be decorated and calculated according to the number of blocks: the decoration area of the bathroom wall tiles The area of each bathroom wall tile [1+3% (loss)] = the amount of bathroom wall tiles required for decoration.

After learning the calculation method of bathroom wall tiles, you should pay attention to the key points of bathroom wall tile laying!

In order to avoid the dark design of the interior making the interior too gloomy, you may wish to choose bright glass.

Paintings are dotted to brighten up the space.

In addition to being waterproof, non-slip and easy to clean, the wall tiles in the bathroom should also be beautiful. It is generally appropriate to choose a wall tile with delicate patterns and elegant tones to match the interior flooring and furniture in a classic style.

The wall tiles of the same color can be spliced in a large area in the bathroom to create an independent functional area.

The bathroom is slippery, so you might as well choose a small mosaic wall tile as a splicing for the floor, so that while improving the safety of use, you can also clearly divide different areas and spaces through it.

If the space in the bathroom is relatively small, the bathroom wall tiles can be selected with a bright appearance to enhance the visual transparency. The most suitable combination of such wall tiles is the bathroom door made of glass.

In this way, a small space can also present a large home.

Spatial sense. The use of bathroom wall tile adhesive pavement is also called dry pasting, and the wall tiles do not need to be moistened with water in advance. As long as the conditions of the paving are installed, the environment can be improved. The bonding effect is very good, which is suitable for home decoration.

This type of caulk is generally found on walls with gaps. It is characterized by not easy to discolor, wear-resistant, makes the gap stronger, and the color matches the wall tiles properly.

The calculation of bathroom wall tiles must be carefully calculated in the bathroom, and the laying of wall tiles must be painstaking. Before decoration, learn the calculation method of bathroom wall tiles and understand the key points of wall tile laying, so as to make the decoration style of the bathroom go to the next level!

Taking a small house as an example, the common size of wall tiles (300*450) and floor tiles (300*300), the floor area divided by the tile specification is the required number of tiles. Multiply the number of tiles required by the number of tiles required to be lost.

Take the bathroom area of one square and the wall area of about 18 square meters, as an example, the number of tiles required for the ground: 45 pieces + 2 pieces (loss) = 47 pieces of tiles, the number of tiles required for the wall: 134 pieces + 6 pieces (loss) + 140 pieces of tiles.

If you are a non-professional owner, it is recommended that you do the math. Generally, it is a little more than twice the land area.

The length of the four walls is multiplied by the height of the wall tiles.

Perimeter * height (area of doors and windows.