The second bedroom is connected to the balcony and would like to convert it into two bedrooms

Updated on Second bedroom 2024-01-27
2 answers
  1. Anonymous users2024-01-23

    To change the suggestion to consider a few questions:

    1. The partition wall has a certain thickness (about 12cm), and the remaining space is not enough;

    2. Whether it will affect the lighting after separation, and whether the other room is too dark;

    3. Whether the room near the balcony is exposed to the west, and if so, whether it will be too hot;

    4. If there is a wall between the balcony and the room, can it be removed?

    5. How to open the doors of the two bedrooms;

    6. Whether the air conditioner in the two bedrooms is easy to install, whether there is an air conditioning position, air conditioning holes, and where to put the external unit.

  2. Anonymous users2024-01-22

    Yes, my study and balcony have also been converted into one.

Related questions
2 answers2024-01-27

Hello! The shared area is the abbreviation of the shared construction area, that is, the common construction area jointly occupied or used by all property rights includes elevator shafts, pipe shafts, stairwells, garbage chutes, substation rooms, equipment rooms, public foyers, corridors, guard rooms on duty, the construction area of public buildings and management rooms serving the whole building, the separation wall between the suite and the public building, and the external wall (gable), and the common wall area outside the construction area of the suite. >>>More

1 answers2024-01-27

If the bedroom and balcony are not large, you don't need to install sliding doors, but if the second bedroom itself is large and the balcony is the kind that connects the two houses, it is recommended to install sliding doors. This makes the heating or air conditioning in the bedroom much better!

2 answers2024-01-27

Hello sliding doors.

The door of the second bedroom can be locked in the same way as the window. >>>More

1 answers2024-01-27

Two methods:

1. Open the "Control Panel" - Network Connection", find the current local connection, right-click it, select "Properties", double-click "Internet Protocol (TCP IP)" in the "General" tab, select "Use the following IP address", generally fill in the "IP address", fill in the "subnet mask", do not fill in the others, and then click "OK" to solve the problem. If the problem is not solved, make sure that the IP address is on the same network segment as the IP address of the ADSL modem. If the current computer is a workgroup or domain, set it up on a case-by-case basis. >>>More

3 answers2024-01-27

After a few years of sealing, now decorate the first dragon tiger mountain cultural stone to make a small flower platform.