-
Anonymous users2024-01-231. Electric fusion connection: The electric fusion connection is to put the electric fusion pipe fittings on the pipes and pipe fittings, and the resistance wire on the inner surface of the electric fusion pipe fittings is heated by electricity, and the inner surface of the electric fusion pipe fittings and the outer surface of the pipe with the Qi are melted into one. 2. Hot melt socket connection:
Through the hot melt connector, the socket end of the pipe and pipe fitting and the socket end of the pipe fitting are heated and melted at the same time, and the molten socket part is inserted into the socket part and fixed until cooling. 3. Hot-melt butt connection: hot-melt butt is to connect and fuse the end of the thermoplastic pipe with a heating plate after heating and melting.
Clever kitchen gas pipe decoration treatment.
It's classic, it must be topped. >>>More
Kitchen gas pipeline decoration needs to pay attention to the following: >>>More
Make holes in the countertop or cabinet side, and leave holes through them. >>>More
If it's fast, just install the tube. If you need to go through the case, you can punch holes. Don't be afraid of trouble to let the pipe go under the case, and it is troublesome to punch holes. Hope it helps. >>>More
In the past, it could be wrapped in a cabinet, which was beautiful and beautiful. >>>More