Is solid wood particle board or MDF better?

First of all, MDF is the popular term of MDF, which is a kind of man-made board made of wood fiber or other plant fibers as raw materials, crushed, separated and dried with urea-formaldehyde resin or other applicable adhesives, and then hot-pressed. The advantages are: the material is relatively fine, and the cutting surface will be sealed well when the edge is sealed, so that it is not easy to open the glue.

It can be pressed into various shapes, so there are usually more door panels. The flatness is better! The disadvantages are:

Because the substrate is powdered as raw material, more glue is used than particle board. Why is there more? For example, particle board is the pellet of wood and the other is powder, which is like mixing mud, one fine sand, one stone, and of course fine sand with more water.

In the same way, MDF has a high glue content. Another is that the nail holding force is not good, if the nail is loosened after tightening, because the strength of the MDF is not high, it is difficult to fix it, so it is rarely used to make a cabinet. Speaking of particleboard, particleboard, also known as particle board and bagasse board, is a wood-based board made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying adhesive.

The principle is the same as that of MDF. The advantages are: very good moisture resistance, high density and good strength.

The glue content is small, and the nail holding force is better than that of MDF, because particleboard is a natural wood crushed into granules and pressed into boards, which is the main material of cabinets at present. MDF is formed by pressing powdered wood chips, which has good flatness but poor moisture resistance. In contrast, particleboard has a better nail grip than MDF.

The disadvantages are: the flatness of particleboard is not as good as that of MDF, and it cannot be curled and shaped. Because the particleboard is easy to make, the quality varies greatly, and it is not easy to distinguish, and the bending and tensile resistance of the particleboard is poor.

It's too professional to give an example! MDF is like a wall made of sand, and particle board is a wall made of small stones. Everyone thinks that the appearance is more important, choose MDF, and the molded European style is molded door panels.

If you choose a strong, solid one, choose particle board.

Which board is better, solid wood particle board or MDF, I personally think that solid wood particle board is better. Solid wood particle board is a new material for furniture. First, the wood-based panel species is closest to nature, and it is better than natural wood, and the second is that the inside of the solid wood particle board is granular with a cross and staggered structure.

Therefore, the nail holding force is good, and round nails and screws can be nailed. These machinability properties are significantly better than MDF. 3. Solid wood particle board warping deformation is small, the size is stable, the surname is good, the strength is high, the stiffness is good, unlike MDF and other wood-based panels when used as a countertop, the strength of deformation and bending within 1mm of the diagonal is less than 2mm, and the density board is easy to deform.

Because solid wood particle board is not easy to deform, it is better than MDF and other wood-based panels in the process of storage, transportation and use. Fourth, the density of solid wood particle board is higher, the wood fiber particles in the board are larger, unlike the density fiber of the MDF, which retains the essence of natural wood more, and the content of solid wood particle board is generally less than 5% in the use of adhesive, and the glue content of the MDF is 7%.

MDF and particle board are different materials, and both have their own advantages and disadvantages. MDF is wood fiber and other plant fibers, advantages: delicate material, good edge sealing on the cutting surface, not easy to cause glue, various styles, can do a variety of shapes; Cons:

There is a lot of formaldehyde, and the moisture-proof effect is poor. The advantages of particle board: strong nail grip, much less glue used than MDF, relatively environmentally friendly, strong stability, hanging weights will not bend; The disadvantage is that you can't do all kinds of styling.

As for which of the two materials is better, you can choose accordingly according to your own needs.

MDF is also MDF, which is a kind of man-made board made of wood fiber or other plant fibers as raw materials, crushed, fiber separation, drying and then applied with urea-formaldehyde resin or other suitable adhesives, and then hot-pressed.

The advantages are: the material is relatively fine, and the cutting surface will be sealed well when the edge is sealed, so that it is not easy to open the glue. It is easy to press into various shapes and make shapes, so there are usually more door panels or back panels.

The disadvantage is that because the substrate is powdered as raw material, more glue is used than particle board, which is more likely to cause environmental problems. Secondly, due to the glue content of the MDF, the internal structure space is less, and the moisture resistance is poor, a piece of density is soaked in water for 24 hours, and it is obvious that the four sides of the MDF are raised and deformed after more than ten hours.

In addition, solid wood particle board is a wood-based panel made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying adhesive. The principle is the same as that of MDF.

The advantages are: 1) The inside of the solid wood particle board is a granular structure with a cross and staggered structure. Therefore, the nail holding force is good, and round nails and screws can be nailed.

These machinability properties are significantly better than MDF. 2) The density of solid wood particle board is higher, the wood fiber particles in the board are larger, and the essence of natural wood is more retained, and the content of solid wood particle board is generally less than 5% in the use of adhesive, which is more environmentally friendly. 3) The solid wood particle board has small warping and deformation, stable size, high strength, good stiffness, and is not easy to bend when hanging heavy clothes.

At present, the wood-based panels used in the European furniture market are mainly solid wood particle boards.

The disadvantage is: the flatness of solid wood particle board is not as good as that of MDF, and it is more difficult to do curvature and modeling.

At present, in the European market, for the sake of environmental protection, it is basically based on solid wood particle board, and most of the domestic manufacturers also use solid wood particle board as the base material of the cabinet.

In fact, in one wardrobe it is better if both are used. The back board is made of MDF, and the laminate is made of solid wood particle board, which can not only take advantage of the good flatness of the MDF, but also make use of the environmental protection of the solid wood particle board, which can maximize the creation of an environmentally friendly living environment.

Look at what you're going to do, if it's a cabinet, you must use particle board, and now the box of the brand cabinet is made of particle board. Nowadays, most of the veneered boards used to make wardrobe panel furniture are also particle boards. MDF has poor nail grip and is volatile.

The difference between solid wood particle board and MDF:

1. MDF is also MDF, which is a kind of man-made board made of wood fiber or other plant fibers as raw materials, crushed, separated and dried with urea-formaldehyde resin or other applicable adhesives, and then hot-pressed. The material is relatively fine, and the edge of the cutting surface will be sealed well, so that it is not easy to open the glue. It is easy to press into various shapes and make shapes, so there are usually more door panels or back panels.

However, because the substrate is powdered as raw material, more glue is used than particle board, which is more likely to cause environmental problems. Secondly, due to the glue content of the MDF, the internal structure space is less, and the moisture resistance is poor, a piece of density is soaked in water for 24 hours, and it is obvious that the four sides of the MDF are warped and deformed after more than ten hours.

2. Solid wood particle board is a wood-based panel made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying adhesive. The inside of the solid wood particle board is a granular structure of cross and staggered structure. Therefore, the nail holding force is good, and round nails and screws can be nailed.

These machinability properties are significantly better than MDF. The density of solid wood particle board is higher, the wood fiber particles in the board are larger, and the essence of natural wood is more retained, and the content of solid wood particle board is generally less than 5% in the use of adhesive, and the environmental protection is better. Solid wood particle board has small warping and deformation, good dimensional stability, high strength, good stiffness, and is not easy to bend when hanging heavy clothes.

It must be MDF, why do you take a piece of MDF and a piece of solid wood particle board and throw it from the same height, you will find that the toughness and strength of MDF is better than that of solid wood particle board, this is intuitive, and the results are clear at a glance.

Among the decoration boards, solid wood particle board and MDF are two more common boards.

The density of solid wood particle board is relatively high, the board surface is relatively wide, the surface is smooth and smooth, will not warp and crack, and the strength is higher than that of MDF.

MDF is the preferred substrate for paint effect, it has good decorative properties, but it is not moisture-proof, once it encounters water, it will expand and deform.

Which is better, MDF or solid wood particle board, depends on what needs to be used, after all, choosing the right board is the best.

Which is better, MDF or particle board? Now let's analyze: what are the advantages and disadvantages of MDF?

MDF: It is a kind of wood-based board made of wood fiber or other plant fibers, which is made of wood fiber or other plant fibers as raw materials, crushed, separated from fibers, dried and then applied with adhesives, and made after hot pressing. Pros :

The material is relatively fine, and the edge of the cutting surface will be sealed well, so that it is not easy to open the glue. It is easy to styling. Cons:

Because the substrate is made of powder, more glue is used than particle board, which is more likely to cause environmental problems. Secondly, due to the large glue content of MDF, the internal structure space is less, and the moisture resistance is poor. If a piece of MDF is soaked in water for 24 hours, it can be clearly seen that the four sides of the MDF are warped and deformed after more than ten hours.

Solid wood particle board: It is a wood-based panel made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying adhesive. Pros :

1) The inside is granular with a cross-staggered structure, so the nail holding force is good. These machinability properties are significantly better than MDF. 2) High density, large wood fiber particles in the board, retaining the essence of natural wood.

In the use of adhesives, the content of solid wood particle board is generally less than 5%, and the environmental protection is better. 3) Small warpage deformation, good dimensional stability, high strength and stiffness. Cons: