How to repair a leaky toilet tank

Updated on Toilet 2024-01-28
6 answers
  1. Anonymous users2024-01-23

    If the toilet tank is leaking, turn off the faucet first to find out the cause of the leak. If it is caused by a poor seal of the tank, use a repair kit to reseal the tank. If the water leakage is caused by internal component problems, the water tank needs to be repaired or replaced.

    Before repairing, please read the instructions carefully or ask a professional to deal with it.

  2. Anonymous users2024-01-22

    In fact, if it is not divided into two parts of the large and small water flow, there is no way to verify a brand on the Internet, so maintenance has become a problem. Don't dare to disassemble it rashly. In case there are no accessories.

    I replied speechlessly: It doesn't matter, there should be an angle valve before connecting the toilet, you can turn off the water in the toilet! You said that the water keeps flowing into the tank, you can also check it between them, it is generally a float control switch, if not, completely replace it and buy a float control switch!

    You said that the water switch on the water tank is also rusty, find a wrench and do it twice, you can gradually move, if there is no way, only to remove and replace!

  3. Anonymous users2024-01-21

    You need to make it clear whether it is a leak at the inlet or outlet. If it is a leak at the water inlet, just replace the water inlet pipe, generally the rubber pad is aging, and just changing the gasket can also solve the problem. If it is a leak at the outlet, it means that there is water flowing down the drain from the toilet all the time, then it is that the drain valve in the toilet tank is broken or the rubber mat is stuck with debris.

    The solution is to clear the debris or replace the drain valve entirely.

  4. Anonymous users2024-01-20

    If you go to the place where you sell toilets, you can buy accessories and install them yourself, and it should not be too difficult.

  5. Anonymous users2024-01-19

    I don't know what structure your tank is in.

    Just buy a suitable accessory and replace it.

    It's simple, with little to no professional skills.

  6. Anonymous users2024-01-18

    Hello. This problem does not need to be repaired at home. As long as you do it yourself, you will not save labor costs, and if you need to replace accessories, you don't know how much it will cost. Just buy accessories online and find them yourself.

    Our shop is specialized in matching toilet water parts and maintenance. You can come to the store to have a look, if you can trust me, I can help you get good accessories, and you can also teach you to disassemble and install accessories, if you understand, you don't need to hire someone in the future.

Related questions
1 answers2024-01-28

( ) Check whether the filter screen of the inlet valve is blocked by debris. >>>More

1 answers2024-01-28

If you're a boy, I'd suggest you get it yourself. It's good to use both brothers, and AB glue is OK. Dry with a hair dryer. >>>More

21 answers2024-01-28

1. Check whether the flush switch is reset. The plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. Generally, the switch can be reset by repeating it several times. >>>More

6 answers2024-01-28

The toilet plays a very important social role in daily life, although it is not a lofty role, but without the toilet, you have to live and you can't continue. 1.First of all, open the toilet tank, and let's see what level the scoop inside the tank is at when it is full. >>>More

6 answers2024-01-28

Kitchen storage space design: more than 30 square meters of snail dwelling into 24 houses, IKEA IKEA is very creative design, SOHO people, perfect and comfortable house, bar kitchen, elegant humanistic home, entrance restaurant, 1Check if the flush switch is reset. The plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. >>>More