-
This should be that the waterproofing of the wall skin is not done well, and the waterproofing at the bottom should be fine, so the wall skin will fall off.
-
There are other situations that affect the effect of waterproofing from the ground down, so it is more serious, if it affects life, you can shovel it all and do it again, I suspect it is a problem with the blank.
-
In the bathroom at home, the hanging bottle next door said that the waterproof is not good, but the user who lives downstairs does not have these things, and the reason is that the water pipe upstairs may be ruptured and the water is deep.
-
How high is your peeling position above the ground? Is it on top of the waterproofing layer? Or is it below?
In this case, there are two possibilities, one is that after the waterproof test is done, the waterproof layer is damaged in the follow-up construction, and the second is that the height of the façade is not enough, or the waterproof is not carried out.
-
The bathroom door in my house is also on both sides, and the wall skin is peeling off. Later, it was waterproofed, and then it was puffed up again. Maybe it's a damp bathroom.
-
It may be caused by the dampness of the home, or it may be that the materials used for the wall skin at home are not very good. There is an option to change point materials.
-
The bathroom partition at home says that the waterproofing is not good, but what is the reason why the residents downstairs are good? It's still leaking or not, it won't fall off and won't peel.
-
Most of the skin peeling on the wall downstairs is caused by dampness and water leakage. The downstairs residents are good because the downstairs doesn't care.
-
Explain that you didn't do the waterproofing of the walls of this house. Then you go downstairs and the waterproofing is done better.
-
The wall waterproofing is not good, and it affects the next door.
floors affect the downstairs.
-
In general, it doesn't mean that naughty is, waterproof, not good, it may be that you bought it, and there is a problem with the quality of the delivery.
-
It may be that the quality of the materials used in the decoration at that time was not very good, and the bathroom was very trendy, so it is normal for this situation to occur.
-
This is going to find a professional person to meet you, is it that the material is not used, uh, and then the reason for cutting corners is that you must replace them all.
-
The peeling off of the sanitary partition wall is mainly due to the peeling caused by strong humidity, and the main reason for operation is water leakage.
-
If you find this material and use it in the bathroom, it is very easy to have problems. Then you can put tiles on the inside of the bathroom.
-
It could be the time to build a house. Some workers are skilled, and some are not.
-
Many of the commercial houses you buy now are of uneven quality, and it is possible that the board on your first floor is not doing well, which is very possible.
-
That is, the bathroom is too humid, and it is usually ventilated.
-
The bathroom in the house peels, but because the waterproof is not good.
-
Maybe it's a problem with the plumbing in your own home, and you can find someone in the old hospital.
-
It could be that your bathroom is too damp.
The waterproofing is not done well, and the waterproofing on the side of the bathroom is too low, so look for a waterproof one and then do it.
The sanitary partition wall is an exterior wall that does not need to be waterproofed, but the floor and wall in the bathroom must be done, and the waterproof construction must be done by professionals. Prevent water leakage into the wall of the downstairs or next room.
Oh, more than 20 experts, ha! The sources of water in the floor slab are just a few, one is that there is a water pressure pipe, if you have eliminated it, then what remains is the water used to seep in from the ground tile joints, or the interface of the sewer pipe or something, the water to the mortar layer under the tiles is there, and then seep down from the weak point of the floor slab!
Fine decoration usually the waterproof of the dry area of the bathroom is 300 high, and the wet area and the public wall part of the bedroom or study are 1800 high. Waterproof to the root of the wall foot pipe root first, and then do a large surface, first difficult and then easy, waterproof paint twice to vertical brush, a waterproof completion, water storage 24 hours without leakage, and then do mortar protective layer, and then tiling.
Don't ask me, I'm the same judgment as you, and it should have nothing to do with you. In addition, he is waiting for him to sue you, he is not qualified to win against you at all, he should be the party of evidence as the plaintiff, he has no right to collect evidence directly from your room, you can probably keep some information, such as taking photos of the water leakage of 301, and taking photos of your observation in the outer corridor of 401 next door, and I don't think the rest is at all. If the court is impartial, you will definitely not be confused, don't let him scare you. >>>More