-
Anonymous users2024-01-23Remove putty or latex paint from balcony walls, and then chisel the surface layer of cement mortar for whitewashing. Tile paving construction can be carried out. If there is no paint on the balcony wall. Tiles can be laid directly on top of the mortar surface. I hope my answer can help you.
-
Anonymous users2024-01-22I'm a newbie though. But there have been many times to decorate the experience of the house, if your balcony and kitchen are connected, whether there is no door between them, be sure to stick wall tiles and ceilings, the style and color of the ceiling and bricks are exactly the same as the kitchen, this is experience; If the living room or bedroom is connected to the balcony, the floor tiles are certain, and the same as the living room or the color of the floor is close, but the wall tiles are not necessarily, unless you have a lot of clothes to dry and splash around, my first house balcony is connected to the living room, it is a decent paving of wall tiles, it feels a little rustic (by no means a color problem), the second set is not done, the area is 8 square meters, just painted white, marble window sills, the ceiling is not suspended, usually drying clothes and not damaging the wall, if you must paste, It is recommended to use a lighter color than the ground, not the same color, do not use exterior wall tiles, exterior wall tiles are thicker than general porcelain tiles, take up space, feel rough and thick, and there is no sense of unity in the interior, unless your balcony and room are large enough (more than 10 square meters). It is recommended that you do not stick tiles on the top, the disadvantages of tiles:
1, paving trouble, technical parameters difficult to control: the paving of ceramic tiles is currently commonly used dry and wet two methods, because the ceramic tile manufacturing precision is not high, the specifications of the existing ceramic tiles are generally large, the joints are not neat when paving, and the height difference is large. Dry paving is easy to cause tiles to fall off, and wet paving is easy to increase the height difference.
2. Slippery: The surface treatment process of ceramic tile makes the friction generated in the process of use very small, so it is very slippery; If the tile absorbs oil, it will be more slippery. 3. Cold:
Every unit and family with tiles has a deep experience of the cold of tiles in winter! As a result, there are many people who suffer from rheumatoid arthritis, not to mention how the elderly who suffer from rheumatoid arthritis endure the cold and long winter. 4. Easy to re-damp:
It is particularly serious in many areas of China, especially in the southeast coast and the middle and lower reaches of the Yangtze River, and it also has a certain amount of radiation. H is still the era of 1+1 ceiling is better. Having said so much, it seems that there is less truth, and it is the conclusion that I have seen a lot of rooms and installed a few rooms, I hope it will help you.
-
Anonymous users2024-01-21Choose small-sized tiles and pave them with cement.
The height of the balcony wall tiles is generally about meters, if the balcony has a washing machine faucet, the tile should be slightly higher than the faucet 20 cm.
Clean up the original tile gaps, solve the problem of water seepage and alkali regeneration with tile caulking agent, and clean up the water on the ground in time after the rain.
I'm a newbie though. But there have been many times to decorate the experience of the house, if your balcony and kitchen are connected, whether there is no door between them, be sure to stick wall tiles and ceilings, the style and color of the ceiling and bricks are exactly the same as the kitchen, this is experience; If the living room or bedroom is connected to the balcony, the floor tiles are certain, and the same as the living room or the color of the floor is close, but the wall tiles are not necessarily, unless you have a lot of clothes to dry and splash around, my first house balcony is connected to the living room, it is a decent paving of wall tiles, it feels a little rustic (by no means a color problem), the second set is not done, the area is 8 square meters, just painted white, marble window sills, the ceiling is not suspended, usually drying clothes and not damaging the wall, if you must paste, It is recommended to use a lighter color than the ground, not the same color, do not use exterior wall tiles, exterior wall tiles are thicker than the general porcelain tiles, occupy space, feel rough and thick, and there is no sense of unity in the interior, unless your balcony and room are large enough (more than 10 square meters), said so much, it seems that the truth is less, are to see a lot of rooms to install a few rooms to draw the conclusion, I hope to help you answer: 2006-08-24 12:40
The most fundamental method is to remove the tiles in the corresponding parts according to the leakage point, and plug the cracks or leaks of the waterproof layer. The way to plug the leakage without removing the tiles is to treat the symptoms but not the root cause, and there will still be leakage problems in the later stage.
It looks like 7CM glass on the top, but in fact it is at least 10CM or more, and then it is placed on the chandelier, and then there is a board on the back of the glass to fix the glass, and the glass is glued to the board.