What are the advantages and disadvantages of all solid wood furniture?

1. After the solid wood panel is painted, there is no uneven surface of the glue seam and the unevenness of the slats, and the physical properties are relatively stable in the process of long-term use;

Second, the utilization rate of wood is high, which is in line with the principle of ecological utilization of raw materials. Therefore, in terms of use and texture color, solid wood panels are more suitable for the use and decoration of furniture;

3. Although the amount of sizing applied to the solid wood puzzle board is greater than that of the solid wood wide panel, due to the protection of the double-covered thick veneer, and the edge sealing of the four-sided thick veneer actually has only 8 glue seams on both sides and four sides, the chemical substances volatilized by the adhesive through the glue seam in the solid wood puzzle are far lower than the volatilization of the solid wood wide puzzle and the solid wood laminated lumber, which is more environmentally friendly and healthier.

Fourth, because the core board is made of wood with small anisotropy, the uneven surface of the board and the degree of warping are small, and the upper and lower sides are covered with two planed thin wood thick veneers, which can better eliminate the uneven warping, cracking and deformation of the board surface, and can improve the physical strength of the board in all directions;

Fifth, the planed thin wood thick veneer is a selection of high-quality logs of large diameter, and strictly selected according to the texture and color, and manufactured by high-precision equipment and scientific planing methods. This kind of processing technology is very good in terms of texture and color, and the texture is more prominent after painting, and the production of formal furniture can create a harmonious and high-end sense of value.

Disadvantages of solid wood furniture.

The main disadvantage of solid wood furniture is that it is easy to crack and deform, and if the process is not up to standard, there will be after-sales risks in the later stage. For example, it can not be exposed to direct sunlight, it cannot be too cold and too hot, and too dry and humid environments are not suitable for solid wood furniture; If you do not pay attention to the use of the air conditioner, the temperature and humidity changes too much due to frequent switching on and off of the air conditioner, even if it is a qualified solid wood furniture product, sometimes deformation and cracking will occur, it can be said that no matter what kind of wood is used, how exquisite the workmanship is, it is difficult to avoid these problems.

As for the purchase of solid wood furniture, I think there are many tree species of solid wood furniture, and the price difference is also different. Solid wood furniture is very environmentally friendly and has a long service life, but the price is certainly relatively high. The purchase depends on your personal needs.

Solid wood furniture refers to furniture made of natural wood, and the grain of the wood can generally be seen on the surface of the furniture. At present, there are roughly two kinds of solid wood furniture on the market, one is pure solid wood furniture, all the materials used in the furniture are solid wood, including the desktop, cabinet door panels, side panels, etc., are made of pure solid wood, and no other wood-based panels are used. The other is imitation solid wood furniture, that is, the natural texture, feel and color of the wood are exactly the same as solid wood furniture from the appearance, but in fact it is a mixture of solid wood and wood-based panels, such as side panels, shelves and other particleboard or MDF with thin wood veneer, and doors and drawers are made of solid wood.

The fly in the ointment of solid wood furniture:

The main problem of solid wood furniture is that the change of moisture content makes it easy to deform, so it can not be exposed to direct sunlight, and the indoor temperature can not be too high or too low, and too dry and humid environments are not suitable for solid wood furniture. In addition, the combination of solid wood furniture components usually adopts tenon structure and adhesive, and the finished product generally cannot be disassembled, and it is very inconvenient to handle.

Advantages of wood-based panel furniture:

The combination of wood-based panel furniture components usually uses a variety of metal hardware, which is very convenient for assembly and disassembly, and the furniture with high processing accuracy can be disassembled and installed many times. Because it has a variety of veneers, the changes in color and texture can give people a variety of different feelings, and there are also many changes in the shape design, which has personality and is not easy to deform.

Disadvantages of wood-based panel furniture:

The problem of wood-based panel furniture is more in environmental protection, if the furniture is made of particleboard and other materials, and the veneer and edge are not all wrapped, it is easy to release formaldehyde that causes pollution to the environment and is harmful to the human body. Generally speaking, if there is a strong pungent smell when opening the cabinet door or drawer, it is mostly excessive formaldehyde, and this kind of furniture should not be purchased.

The advantages of all solid wood furniture should be as follows.

1. Natural, environmentally friendly and healthy, solid wood furniture reveals the beauty of nature and primitiveness.

2. Long service life, able to use for about 10 to 20 years.

3. Solid wood furniture has a certain value preservation function.

4. The physical properties of solid wood furniture are relatively stable in the process of long-term use;

The disadvantages are also a few points that solid wood furniture will have.

1. The main problem of solid wood furniture is that the change of moisture content makes it easy to deform.

2. The material is heavy and not easy to handle.

3. The material is hard, the processing difficulty is high, and it is easy to crack.

There are many advantages of all-solid wood furniture, but the main disadvantage is that it will crack.

What are the advantages and disadvantages of panel furniture and solid wood furniture:

1. The style of plate furniture is diverse.

Changes in color and texture can give a variety of different feelings.

2. The plate furniture technology is mature and the quality is stable.

3. Plate furniture is less affected by the environment and will not be easily cracked and deformed.

4. It is easy to disassemble and move plate furniture, and the combination of components usually uses metal hardware, which is very convenient for assembly and disassembly, and the furniture with high processing accuracy can be disassembled and installed many times.

5. Compared with solid wood furniture, the price of plate furniture is more common, and it is favored by most consumers.

6. Plate furniture can be customized according to personality.

7. As long as the edge sealing of the plate furniture is properly handled, it can also be green and environmentally friendly, and there is no pollution to the environment and the human body. The wood of solid wood furniture should be treated with insect and mildew prevention, and adhesives and paints should also be used, if the harmful substances of these materials exceed the standard, they will also cause pollution.

8. Plate custom furniture can make up for the defects of the house type, improve the overall function of the home, and can arbitrarily design furniture with strong storage and functionality.

9. Plate custom furniture can be designed to match the style of home decoration.

10. Authenticity is easy to distinguish: Generally, choose brand furniture, and there will be no fake and shoddy products.