What should I do if the tailstock of the lathe is not centered on the front of the car

Updated on Foot of the bed 2024-01-27
1 answers
  1. Anonymous users2024-01-23

    Find a 100-200mm bar stock with a clamp at one end and a top at the chuck, and the tailstock is adjusted to the front (how much is adjusted to the actual situation of the measurement), on the contrary, the tailstock is large and adjusted to your side, for example, the big head and small head are adjusted to the meter).

Related questions
How to adjust the equal height of the two centers of the head and tailstock of the lathe
3 answers2024-01-27

5.1 Overview of mechanical assembly.

Assembly is a later stage of the entire machine building process. The various parts of the machine can only be assembled correctly to complete the required product. How to assemble parts into a machine, the relationship between the accuracy of parts and the accuracy of products, and the method to achieve assembly accuracy are the problems to be solved in the assembly process. >>>More

Record the machining process of CA6140 lathe headbox parts and mark
3 answers2024-01-27

Now CA6140 lathes are not the same, each manufacturer is different, you have to make specific drawings for specific analysis.

There is a wardrobe next to the bed and at the foot of the bed in the master bedroom
2 answers2024-01-27

Coupled with the size of the door slide, there is enough space in the wardrobe to hang clothes. "The width of one shoulder is about 500 mm," which means that the size of your wardrobe is more than 500 mm. >>>More