What to do if the bathroom floor at home is leaking

Before repairing the water leakage in the digging room, it is necessary to determine the cause of the leakage in the bathroom, and the two methods for judging the cause of the leakage are as follows

The method of judging the water seepage on the ground: as long as the ground uses water, there is water leakage downstairs, and when the ground does not use water, there is no more water leakage downstairs.

The method of judging the leakage of water pipes: the leakage of water pipes is generally large and continuous; If the bathroom has not used water for several days, but there is still water leakage, and the leakage water has not been reduced, it is a problem with the water pipe.

First, if the bathroom is leaking water from the waterproof layer, not the upper and lower water pipes. They can be repaired without planing tiles.

The maintenance method is very simple, which is to use a new type of penetrating waterproofing agent to waterproof the surface of the bathroom, so that the water does not enter the ground and flows directly from the waterway. You can go to the Internet to find 100 million waterproof. Learn more details.

Second, if it is a problem with the upper and lower water pipes. And if the water pipes are underground, you need to consider planing tiles, but you don't have to redecorate the bathroom. For example, if the inlet pipe is leaking, the pipe can be changed to avoid the leaking water pipe.

If it is a leak in the sewer pipe, it is also necessary to find the specific location of the leakage, and according to the situation, it is determined that it is partially planed bricks to solve, and it is not necessary to plane all of them.

Here's how to solve the problem:

1. Treat the dust, oil, and water on the surface, and keep the surface dry; 2. If the tile joint is filled with caulk, you need to use a knife to draw a small groove; 3. In the cement parts such as tile surface, tile joint, wall joint, pipe root, etc., spray permeable waterproofing agent, and be sure to spray evenly; 4. After the waterproofing agent 9 is dry (about 2 hours later), fill all tile joints and damaged and defective parts with caulking paste, and the weak links around the pipe root are reinforced; 5. The connection between the ground and the wall and the pipe root are made of plastic steel mud as a waterproof edge; 6. After the waterproof construction is completed, the construction part of the letter branch cannot be drenched in water for 24 hours.

As long as you find out the location and cause of the leakage in the toilet and repair it in time, you can keep the safety and comfort of your home.