What tiles to use in the bathroom to look good bathroom tile purchase skills

1. The first thing to do when buying ceramic tiles is to observe that the surface of a good tile has no protrusions or unevenness, no uneven corners, relatively smooth glaze, and no different color shades. At the same time, the pattern of a good tile is more delicate, and there is no dislocation and color leakage.

2. There is a more commonly used way to judge a good wheel car is to listen to the sound of tile knocking, pinch the corner of the tile with a song, and then knock on the tile with the other hand, if the sound is dull, it means that the tile is not good, if the sound of the spring wheel is more crisp, then it means that the quality of the tile is better.

3. When we buy tiles, we can also see the cross-section of the tile, the store in this store generally has broken tiles, if the cross-section is very smooth, relatively fine, then it means that the tile is very good.

4. The difference between good and bad tiles is also reflected in the waterproof performance, we take a tile, turn it over to the back, and then pour a glass of water to see the penetration speed of the water, the slower the traces of water run, the higher the density of the tile, the better.

Dry and wet separation of the bathroom, paved with non-slip bricks in the dry area, and paved with Ma Zheng bend trapped Saike in the shower area, the anti-skid effect is better, and there are many gaps in the small Masai hail tile, which is conducive to drainage, and the drainage slope is also easy to control. Lift the mind.

First, look at the appearance.

The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern is complete, and four or five pieces should be extracted from a box to see if there are defects such as color difference, deformation, lack of edges and corners.

2. Listen to the sound.

Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand.

3. Drip test.

You can drop water on the back of the tile to see how fast the water soaks after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior.

Fourth, the measurement. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade.

In addition, observe its hardness, ceramic tiles with good hardness, strong toughness, not easy to break and rot as the top quality. The edges and corners of the tile fragments are scratched on each other, and the broken fragments are inspected to see whether the broken parts are fine or loose, whether they are hard, brittle or soft, whether they leave scratches, or scattered powder.

The colors commonly used in the bathroom are black, white, gold, silver, and gray, and these five colors are also known as the Polar Color, which can match most decoration styles. However, for what color tiles are used in the bathroom, there are also skills in the matching of colors, such as black and white, dark and light, and so on. Of course, there are also tonal combinations, such as light yellow and dark yellow, black and gray, etc.

If the home decoration style is more warm, you can also choose some warm-colored tiles, but warm-colored tiles are more complicated to match.

Tips for choosing bathroom tiles.

Tiles can generally be divided into two categories, one is glazed tiles, the other is unglazed tiles, and the tiles suitable for bathroom use should be glazed tiles, non-glazed tiles are more suitable for use as living room floor tiles. At the same time, the tiles of the bathroom should also choose non-slip tiles, and choose matte and non-slip tiles, so that even if there is water on the floor of the bathroom, it will not be slippery. Also try to choose brand tiles, quality and after-sales are more perfect.

What kind of tiles to use in the bathroom is a good match.

1.The bathroom has been in a wet state for a long time, and the floor tiles must be anti-slip and waterproof, so the bathroom floor tiles are generally selected from full-body bricks, and the anti-slip and wear-resistant of full-body bricks are better;

2.Bathroom wall tiles are generally glazed tiles, which are rich in color and pattern and have strong anti-fouling ability.

3.The decorative materials of the bathroom wall and floor include glazed tiles, vitrified tiles and mosaics. Now the most commonly used in the family is glazed bricks, and the common specifications are 300 400mm, 300 300mm, and 250 330mm.

The specifications of wall tiles are generally determined by the actual size of the space.

4.The commonly used specifications for the ground are 300 300mm and 330 330mm. The bathroom space is usually 2 to 4, even if the bathroom area is large, do not use large floor tiles.

Because the bathroom space is relatively small compared to the living room space, there are many corners, the frequency of cutting tiles that are too large is high, the waste is large, and it is inconvenient to install floor drains, which is inconvenient for ground leveling, resulting in waste. The choice of wall tiles can be glossy bricks, or matte tiles can be used.

5.There is also a difference between the wall tiles and floor tiles of bathroom tiles, and the wall tiles must be covered with waterproof, corrosion-resistant and mildew-resistant tiles (or glass tiles); It is best to use raised tiles for floor tiles, because of their strong anti-slip function.